Marine Grade Stainless Steel Tube

304 Marine Grade Stainless Steel Tubes Suppliers, Marine SS Tubing Exporters

Marine Grade Large Diameter Tube, 316l Marine Grade Stainless Steel Tubes Distributor

Marine Grade Stainless Steel Tube

Marine Grade Stainless Steel Tube

Marine Exhaust Tube

Marine Exhaust Tube

Marine Stainless Tubing

Marine Stainless Tubing

Tycoon Piping is one of the large suppliers for high quality Marine Grade Stainless Steel Tubes. Marine Grade Stainless Steel is widely used for marine applications. In Marine environment, marine Tube Material must be made clear as to whether the ss is submerged in seawater or is simply near enough to the seashore such that it can be attacked by the chloride present in seawater by splashing or carried by onshore breeze. 316L Stainless Steel Tube is typically considered the minimum grade for use in such a marine environment near the seashore.

Table of content

Marine Grade Stainless Steel Tube Specification

Size 1/8″(10.3mm) to 12″(323.8mm)
Grades TP -304, 316,316L,
Schedule 5/5S,10/10S,20/20S,40/40S,80/80S,120/120S,160/160S according to ANSI B36.19/36.10
Applications marine fittings, marine fasteners, and marine structures
Finish Satin Finish(180#.240#.320#).,Bright Finish(400#,600#,mirror),Mill Finish(2B),Hairline-Finish(HL/Brushed),Ti-gold, Glossy matt,dull and so on.

Marine Tube ClassI:
Marine Grade Stainless Steel Tubes for high temperature above 300 °C. Tubes made of steel with high/low temperature toughness at temperature below – 10 °C. Stainless steel Tubes for chemicals.
Marine Tube ClassII:
Marine Grade Stainless Steel Tubes for general applications
Marine Tube ClassIII:
Marine Grade Stainless Steel Tubes not subject to any special quality specification, weldability in accordance with Rules or Welding

Types of Marine Grade Stainless Steel Tube

304 Marine Stainless Steel Tube

304 Marine Stainless Steel Tube

316 Marine Stainless Steel Tube

316 Marine Stainless Steel Tube

316L Marine Stainless Steel Tube

316L Marine Stainless Steel Tube

Marine Exhaust Tube

Marine Exhaust Tube


Marine Stainles Steel Fuel Tube

Marine Stainles Steel Fuel Tube

Marine Deck Tube

Marine Deck Tube

Marine Drain Tube

Marine Drain Tube

Marine Gas Tube

Marine Gas Tube


Marine Grade Stainless Steel Tube Sizes

Marine Grade Stainless Steel Tubes are finished in accordance with customer needs regarding dimensional and wall thickness specifications as well as heat treatment for more demanding applications. In general a Marine Grade Stainless Steel Tube is manufactured according Marine Grade 304 ,Marine Grade 316 and Marine Grade 316 L standards API, ASTM, and ASME.

MARINE GRADE STAINLESS STEEL TUBE SIZE

Size
OD, Inches
BW
Ga.
Wall
Dec-In.
ID
Weight
Lbs/Ft.
1/8
22
0.028
0.069
0.0290
20
0.035
0.055
0.0336
3/16
22
0.028
0.131
0.0478
1/4
25
0.020
0.210
0.0491
22
0.028
0.194
0.0664
21
0.032
0.187
0.0745
20
0.035
0.180
0.0804
18
0.049
0.152
0.1052
16
0.065
0.120
0.1284
5/16
20
0.035
0.242
0.1039
18
0.049
0.214
0.1382
16
0.065
0.182
0.1722
3/8
22
0.028
0.319
0.1038
20
0.035
0.305
0.1271
18
0.049
0.277
0.1706
16
0.065
0.245
0.2152
7/16
18
0.049
0.340
0.2036
1/2
25
0.020
0.460
0.1025
20
0.035
0.430
0.1738
18
0.049
0.402
0.2360
16
0.065
0.370
0.3020
5/8
20
0.035
0.555
0.2205
18
0.049
0.527
0.3014
16
0.065
0.495
0.3888
3/4
20
0.035
0.680
0.2673
18
0.049
0.652
0.3668
16
0.065
0.620
0.4755
14
0.083
0.584
0.5913
7/8
18
0.049
0.777
0.4323
16
0.065
0.745
0.5623
11
0.120
0.635
0.9676
1
20
0.035
0.930
0.3607
18
0.049
0.902
0.4977
16
0.065
0.870
0.6491
14
0.083
0.834
0.8129
11
0.120
0.760
1.1278
1-1/4
11
0.120
1.010
1.4480

OD inches Ave. Wall inches D/t Ratio ID inches Tube Cross Sectional Area (in2) Internal Area (in2)
0.250 0.020 12.50 0.210 0.0145 0.0346
0.250 0.028 8.93 0.194 0.0195 0.0296
0.250 0.035 7.14 0.180 0.0236 0.0254
0.250 0.049 5.10 0.152 0.0309 0.0181
0.250 0.065 3.85 0.120 0.0378 0.0113
0.375 0.020 18.75 0.335 0.0223 0.0881
0.375 0.028 13.39 0.319 0.0305 0.0799
0.375 0.035 10.71 0.305 0.0374 0.0731
0.375 0.049 7.65 0.277 0.0502 0.0603
0.375 0.065 5.77 0.245 0.0633 0.0471
0.500 0.020 25.00 0.460 0.0302 0.1662
0.500 0.028 17.86 0.444 0.0415 0.1548
0.500 0.035 14.29 0.430 0.0511 0.1452
0.500 0.049 10.20 0.402 0.0694 0.1213
0.500 0.065 7.69 0.370 0.0888 0.1075
0.500 0.083 6.02 0.334 0.1087 0.0876
0.625 0.020 31.25 0.585 0.0380 0.2688
0.625 0.028 22.32 0.569 0.0525 0.2543
0.625 0.035 17.86 0.555 0.0649 0.2419
0.625 0.049 12.76 0.527 0.0887 0.2181
0.625 0.065 9.62 0.495 0.1144 0.1924
0.625 0.083 7.53 0.459 0.1413 0.1655
0.625 0.095 6.58 0.435 0.1582 0.1486
0.625 0.109 5.73 0.407 0.1767 0.1301
0.750 0.028 26.79 0.694 0.0635 0.3783
0.750 0.035 21.43 0.680 0.0786 0.3632
0.750 0.049 15.31 0.652 0.1079 0.3339
0.750 0.065 11.54 0.620 0.1399 0.3019
0.750 0.083 9.04 0.584 0.1739 0.2679
0.750 0.095 7.89 0.560 0.1955 0.2463
0.750 0.109 6.88 0.532 0.2195 0.2223
0.750 0.120 6.25 0.510 0.2375 0.2043
0.875 0.020 43.75 0.835 0.0537 0.5476
0.875 0.028 31.25 0.819 0.0745 0.5268
0.875 0.035 25.00 0.805 0.0924 0.5090
0.875 0.049 17.86 0.777 0.1272 0.4742
0.875 0.065 13.46 0.745 0.1654 0.4359
0.875 0.083 10.54 0.709 0.2065 0.3948
0.875 0.095 9.21 0.685 0.2328 0.3685
0.875 0.109 8.03 0.657 0.2623 0.3390
0.875 0.120 7.29 0.635 0.2846 0.3167
1.000 0.028 35.71 0.944 0.0855 0.6999
1.000 0.035 28.57 0.930 0.1061 0.6793
1.000 0.049 20.41 0.902 0.1464 0.6390
1.000 0.065 15.38 0.870 0.1909 0.5945
1.000 0.083 12.05 0.834 0.2391 0.5463
1.000 0.095 10.53 0.810 0.2701 0.5153
1.000 0.109 9.17 0.782 0.3051 0.4803
1.000 0.120 8.33 0.760 0.3318 0.4536
1.000 0.134 7.46 0.732 0.3646 0.4208
1.250 0.035 35.71 1.180 0.1336 1.0936
1.250 0.049 25.51 1.152 0.1849 1.0423
1.250 0.065 19.23 1.120 0.2420 0.9852
1.250 0.083 15.06 1.084 0.304L3 0.9229
1.250 0.095 13.16 1.060 0.3447 0.8825
1.250 0.109 11.47 1.032 0.3907 0.8365
1.250 0.120 10.42 1.010 0.4260 0.8012
1.250 0.134 9.33 0.982 0.4698 0.7574
1.500 0.035 42.86 1.430 0.1611 1.6061
1.500 0.049 30.61 1.402 0.2234 1.5438
1.500 0.065 23.08 1.370 0.2930 1.4741
1.500 0.083 18.07 1.334 0.3695 1.3977
1.500 0.095 15.79 1.310 0.4193 1.3478
1.500 0.109 13.76 1.282 0.4763 1.2908
1.500 0.120 12.50 1.260 0.5202 1.2469
1.500 0.134 11.19 1.232 0.5750 1.1921
1.500 0.148 10.14 1.204 0.6286 1.1385
1.750 0.035 50.00 1.680 0.1886 2.2167
1.750 0.049 40.82 1.902 0.3003 2.8413
1.750 0.065 26.92 1.620 0.3441 2.0612
1.750 0.083 21.08 1.584 0.4347 1.9706
1.750 0.095 18.42 1.560 0.4939 1.9113
1.750 0.109 16.06 1.532 0.5619 1.8433
1.750 0.120 14.58 1.510 0.6145 1.7908
1.750 0.134 13.06 1.482 0.6803 1.7250
1.750 0.148 11.82 1.454 0.7449 1.6604
1.750 0.165 10.61 1.420 0.8216 1.5837
2.000 0.035 57.14 1.930 0.2161 2.9255
2.000 0.049 40.82 1.902 0.3003 2.8413
2.000 0.065 30.77 1.870 0.3951 2.7465
2.000 0.083 24.10 1.834 0.4999 2.6417
2.000 0.095 21.05 1.810 0.5685 2.5730
2.000 0.109 18.35 1.782 0.6475 2.4941
2.000 0.120 16.67 1.760 0.7087 2.4328
2.000 0.134 14.93 1.732 0.7855 2.3561
2.000 0.148 13.51 1.704 0.8611 2.2805
2.000 0.165 12.12 1.670 0.9512 2.1904

MARINE GRADE STAINLESS STEEL TUBE SCHEDULE CHART

NB SIZES SCH 5 SCH 10 SCH 40 SCH 80 SCH 160
1/8″
1/4″
3/8″
1/2″
3/4″
1″
1 1/4″
1 1/2″
2″
2 1/2″
3″
4″
5″
6″

Marine Grade Tube Schedule

Nominal wall thickness comparsion table for stainless steel Tube (ASME B36.10 & B36.19)
DNmm DNin φmm SCH10S SCH40S Sch40
6 1/8 10.3 1.24 1.73 1.73
8 1/4 13.7 1.65 2.24 2.24
10 3/8 17.1 1.65 2.31 2.31
15 1/2 21.3 2.11 2.77 2.77
20 3/4 26.7 2.11 2.87 2.87
25 1 33.4 2.77 3.38 3.38
32 1 1/4 42.2 2.77 3.56 3.56
40 1 1/2 48.3 2.77 3.68 3.68
50 2 60.3 2.77 3.91 3.91
65 2 1/2 76 3.05 5.16 5.16
80 3 88.9 3.05 5.49 5.49
90 3 1/2 101.6 3.05 5.74 5.74
100 4 114.3 3.05 6.02 6.02
125 5 141.3 3.4 6.55 6.55
150 6 168.3 3.4 7.11 7.11
200 8 219.1 3.76 8.18 8.18
250 10 273 4.19 9.27 9.27
300 12 323.8 4.57 9.53 10.31
350 14 355.6 4.78 11.13
400 16 406.4 4.78 12.7
450 18 457 4.78 14.27
500 20 508 5.54 15.09
550 22 559 5.54
600 24 610 6.35 17.48
650 26 660
700 28 711
750 30 762 7.92
800 32 813 17.48
850 34 864 17.48
900 36 914 19.05

Pressure Rating (psig)
Tube Size
(inches)
Tube Schedule Temperature (oF)
100 200 300 400 500 600 650 700 750
1" 40 3048 2629 2362 2171 2019 1924 1867 1824 1810
80 4213 3634 3265 3002 2791 2659 2580 2528 2501
160 6140 5296 4759 4375 4068 3876 3761 3684 3646
1 1/2" 40 2257 1947 1750 1608 1496 1425 1383 1354 1340
80 3182 2744 2466 2267 2108 2009 1949 1909 1889
160 4619 3984 3580 3291 3060 2916 2829 2772 2743
2" 40 1902 1640 1474 1355 1260 1201 1165 1141 1129
80 2747 2369 2129 1957 1820 1734 1682 1648 1631
160 4499 3880 3486 3205 2980 2840 2755 2699 2671
3" 40 1806 1558 1400 1287 1196 1140 1106 1084 1072
80 2553 2202 1979 1819 1691 1612 1564 1532 1516
160 3840 3312 2976 2736 2544 2424 2352 2304 2280
4" 40 1531 1321 1187 1091 1014 967 938 919 909
80 2213 1909 1715 1577 1466 1397 1355 1328 1314
160 3601 3106 2791 2566 2386 2273 2206 2161 2138
5" 40 1342 1158 1040 956 889 847 822 805 797
80 1981 1709 1535 1411 1312 1250 1213 1189 1176
160 3414 2945 2646 2433 2262 2155 2091 2049 2027
6" 40 1219 1052 945 869 808 770 747 732 724
80 1913 1650 1483 1363 1267 1208 1172 1148 1136
160 3289 2836 2549 2343 2179 2076 2014 1973 1953
8" 40 1073 926 832 765 711 678 657 644 637
80 1692 1459 1311 1205 1121 1068 1036 1015 1005
160 3175 2738 2460 2262 2103 2004 1944 1905 1885
10" 40 974 840 755 694 645 615 596 584 578
80 1609 1388 1247 1147 1066 1016 986 966 956
160 3147 2714 2439 2242 2085 1986 1927 1880 1868

NPS Designator Permissible Variations in Outside Diameter
Over In. Under In.
1/8 to 1-1/2, incl 1/64 (0.015) 1/32 (0.031)
Over 1-1/2 to 4, incl 1/32 (0.031) 1/32 (0.031)
Over 4 to 8, incl 1/16 (0.062) 1/32 (0.031)
Over 8 to 18, incl 3/23 (0.093) 1/32 (0.031)

Nominal Wall Thickness:

  • Nominal Wall Tolerance Plus 12.5%, Minus 12.5%
  • These do not conform to the American National Standard for Welded and Seamless Wrought Steel Tube (ANSI B 36.10 – 1979)
NPS Designator Outside Diameter in. Schedule 10S in. Schedule 40S in. Schedule 80S in. Schedule 160 in. Schedule XX in.
1/4 0.540 0.065 0.088 0.119
3/8 0.675 0.065 0.091 0.126
1/2 0.840 0.083 0.109 0.147 .188 .294
3/4 1.050 0.083 0.113 0.154 .218 .308
1.0 1.315 0.109 0.133 0.179 .250 .358
1 1/4 1.660 0.109 0.140 0.191 .250 .382
1 1/2 1.900 0.109 0.145 0.200 .281 .400
2 2.375 0.109 0.154 0.218 .343 .436
2 1/2 2.875 0.120 0.203 0.276 .375 .552
3 3.500 0.120 0.216 0.300 .438 .600
3 1/2 4.000 0.120 0.226 0.318 .636
4 4.500 0.120 0.237 0.337 .534 .674
5 5.563 0.134 0.258 0.375 .625 .750
6 6.625 0.134 0.280 0.432 .719 .864
8 8.625 0.148 0.322 0.500 .906 .875
10 10.750 0.165 0.365 0.500 1.125
12 12.750 0.180 0.375 0.500 1.312
14 14.000 0.188 0.375 0.500 1.406
16 16.000 0.188 0.375 0.500 1.594

Minimum Wall Thickness on Inspection:

  • The following equation, upon which this table is based, may be applied to calculate minimum wall thicknesses from nominal wall thickness:
    • tn * 0.875 = tm Where: tn = nominal wall thickness, in. [mm], and tm= minimum wall thicknesses, in. [mm]
    • The wall thickness is inch-pound units is rounded to three decimal places in accordance with the rounding method of Practice E29. The wall thickness in SI units is rounded to one decimal place in accordance with the rounding method of Practice E29.
  • This table is a master table covering wall thicknesses available in the purchase of different classifications of Tube, but it is not meant to imply that all the walls listed herein are necessarily obtainable for the applicable product specification.
Nominal Thickness Minimum Thickness on Inspection Nominal Thickness Minimum Thickness on Inspection Nominal Thickness Minimum Thickness on Inspection
in. mm in mm in mm in mm in mm in mm
0.068 1.7 0.060 1.5 0.294 7.5 0.257 6.5 0.750 19.0 0.658 16.6
0.068 2.2 0.077 2.0 0.300 7.6 0.262 6.7 0.812 20.6 0.710 18.0
0.091 2.3 0.080 2.0 0.307 7.8 0.269 6.8 0.843 21.4 0.736 18.7
0.095 2.4 0.083 2.1 0.308 7.8 0.270 6.9 0.854 21.7 0.756 19.2
0.113 2.9 0.099 2.5 0.312 7.9 0.273 6.9 0.875 22.2 0.766 19.5
0.119 3.0 0.104 2.6 0.318 8.1 0.278 7.1 0.906 23.0 0.783 20.1
0.125 3.2 0.109 2.8 0.322 8.2 0.282 7.2 0.937 23.8 0.820 20.8
0.126 3.2 0.110 2.8 0.330 8.4 0.289 7.3 0.968 24.6 0.847 21.5
0.133 3.4 0.116 2.9 0.337 8.6 0.295 7.5 1.000 25.4 0.875 22.2
0.140 3.6 0.122 3.1 0.343 8.7 0.300 7.6 1.031 26.2 0.902 22.9
0.145 3.7 0.127 3.2 0.344 8.7 0.301 7.6 1.062 27.0 0.929 23.6
0.147 3.7 0.129 3.3 0.358 9.1 0.313 8.0 1.083 27.8 0.956 24.3
0.154 3.9 0.135 3.4 0.365 9.3 0.319 8.1 1.125 28.6 0.984 25.0
0.156 4.0 0.136 3.5 0.375 9.5 0.328 8.3 1.156 29.4 1.012 25.7
0.179 4.5 0.157 4.0 0.382 9.7 0.334 8.5 1.218 30.9 1.066 27.1
0.187 43.7 0.164 4.2 0.400 10.2 0.350 8.9 1.250 31.8 1.094 27.8
0.188 4.8 0.164 4.2 0.406 10.3 0.355 9.0 1.281 32.5 1.121 28.5
0.191 4.9 0.167 4.2 0.432 10.4 0.378 9.6 1.312 33.3 1.148 29.2
0.200 5.1 0.175 4.4 0.436 11.1 0.382 9.7 1.343 34.1 1.175 29.8
0.203 5.2 0.178 4.5 0.437 11.1 0.382 9.7 1.375 34.9 1.203 30.6
0.216 5.5 0.189 4.8 0.438 11.1 0.383 9.7 1.406 35.7 1.230 31.2
0.218 5.5 0.191 4.9 0.500 12.7 0.438 11.1 1.436 36.5 1.258 32.0
0.219 5.6 0.192 4.9 0.531 13.5 0.465 11.8 1.500 36.1 1.312 33.3
0.226 5.7 0.196 5.0 0.552 14.0 0.483 12.3 1.531 38.9 1.340 34.0
0.237 6.0 0.207 5.2 0.562 14.3 0.492 12.5 1.562 39.7 1.367 34.7
0.250 6.4 0.219 5.6 0.593 15.1 0.519 13.2 1.593 40.5 1.394 35.4
0.258 6.6 0.226 5.7 0.600 15.2 0.525 13.3 1.750 44.5 1.531 38.9
0.276 7.0 0.242 6.1 0.625 15.9 0.547 13.9 1.781 45.2 1.558 39.6
0.277 7.0 0.242 6.1 0.656 16.6 0.573 14.6 1.812 46.0 1.586 49.3
0.279 7.1 0.244 6.2 0.674 17.1 0.590 15.0 1.968 50.0 1.772 43.7
0.280 7.1 0.245 6.2 0.687 17.4 0.601 15.3 2.062 52.4 1.804 45.8
0.281 7.1 0.246 6.2 0.719 18.3 0.629 16.0 2.343 59.5 2.050 52.1

Marine Grade Stainless Steel Tube Chemical Composition

The below table shows the chemical composition of the used forMarine Grade Stainless Steel Tubes:

MARINE GRADE STAINLESS STEEL Tube GRADES UNS C Mn P S Si Cr Ni Mo Ti Nb N
TP304 S30400 0.08 2 0.045 0.03 1 18.0-20.0 8.0-11.0
TP316 S3160 0.08 2 0.045 0.03 1 16.0-18.0 11.0-14.0 2.0-3.0
TP316L S31603 0.035 2 0.045 0.03 1 16.0-18.0 10.0-14.0 2.0-3.0

MARINE GRADE STAINLESS STEEL Tube Mechanical Properties

Material Heat Temperure Tensile Strength Yield Strength Elongation %, Min
Treatment Min. Ksi (MPa), Min. Ksi (MPa), Min.
º F(º C)
TP304 Solution 1900 (1040) 75(515) 30(205) 35
TP316 Solution 1900(1040) 75(515) 30(205) 35
TP316L Solution 1900(1040) 70(485) 25(170) 35

Available Stock of MARINE gRADE Tube

SS 304 Marine Grade Tube SS 316L Marine Tube
SS 316 Marine Grade Marine Tube
316 Marine Stainless Steel Tube Marine Gas Tube
Marine Grade Stainless Steel Tube Marine Water Tube
Marine Grade Stainless Steel Tube Marine Grade Stainless Steel Tube
304 Marine Grade Stainless Steel Tube 316L Marine Grade Stainless Steel Tube
Marine Exhaust Tube TP304 Marine Grade Stainless Steel Tube
Marine Grade Deck Tube TP304L Marine Grade Stainless Steel Tube
Marine Stainless Steel Fuel Tube Marine Grade Stainless Steel Tube Trader
Large Diameter Marine Grade Stainless Steel Tube TP304/304L Marine Grade Stainless Steel Tube
SS Marine Tube >TP316 Marine Grade Stainless Steel Tube
Small Diameter Marine Grade Stainless Steel Tube TP316L Marine Grade Stainless Steel Tube
Marine Grade Stainless Steel Single U Channel Tube Marine Grade Stainless Steel 316L Tube
1/8 marine grade black stainless steel Tube TP316/316L Marine Grade Stainless Steel Tube
Sch 5 Marine Grade Stainless Steel Tube Schedule 40 Marine Grade Stainless Steel Tube
Marine Grade Stainless Steel Tube Schedule 80 Marine Grade Stainless Steel Tube
Schedule 10 Marine Grade Stainless Steel Tube 4 inch marine exhaust Tube

Marine Grade Stainless Steel Tube Price List


Marine Grade Stainless Steel TubeS STOCK SUPPLY APPLICATIONS

These stainless steel Tube grades are sold to a wide range of industries/markets, due to their overall corrosion resistance and good machinability:

  • Marine Grade Stainless Steel Tube for Marine Fittings
  • Marine Grade Stainless Steel Tube used for Marine Structures
  • Marine Grade Stainless Steel Tube application for Marine Industry
We offer wide range of Marine Stainless Tubing, 304 Marine Grade Stainless Steel Tubes & Marine Grade Stainless Steel Tube at factory price.
Tycoon piping provide you with robust quality of Marine Ss Tubing & Sch 80 Marine Grade Stainless Steel Tube in a wide range

Products