E470 ISO 2938 Hollow Bar

  1. Products
  2. Carbon Steel Pipe
  3. E470 ISO 2938 Hollow Bar

Carbon Hollow Bar Suppliers, Carbon Steel Hollow bar Dealer

ISO 2938 Grade 1 Bars Distributor, ISO 2938 Grade 1 Bars Stockist

E470 ISO 2938 Hollow Bar

E470 ISO 2938 Hollow Bar

ISO 2938 Grade 1 Bars

ISO 2938 Grade 1 Bars

ISO 2938 20MNV6 Bar

ISO 2938 20MNV6 Bar

Tycoon Piping is one of the large suppliers for high quality Carbon Hollow Bar (CHB). EN102941-1 2005 E470 (earlier ISO 2938, BS6258) Hollow Bars are seamless tubes specifically produced for machining, manufactured to close straightness tolerances and concentricity; CHB combines excellent tensile properties with good weld ability. EN 10294-1 Carbon Steel Seamless Hollow Bars are also known as mild steel(ms) tubes and pipes. EN 10294-1 Grade E355 Hollow Bars are low at cost Low Carbon Steel Hollow Bars with maximum carbon 022% content with combination of maximum manganese 160 % easy to form and shape. 

The pipes are manufactured as per EN Specification and it is referred as cs pipes or ms pipes. Low Carbon Steel Pipes are not as harder as compared to high carbon steel pipes, though carburizing can increase its surface hardness.

Table of content

E470 Hollow Bar Specification

Application supplying, Construction, School/College Workshop
Material Grade 1.0536, E470
Thickness/Diameter 0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch
Single Piece Length 3 meter, 6 meter
Brand Jayant Impex(JIPL)
Certification Of Conformity (COC) NACE MR0175 Certificate can be provided with an extra cost of testing & sample charges.
Certificate Of Origin (COO) Certified COO by Indian Chamber's Of Commerce can be provided for Indian Origin items.
Payment Terms 100% Advance Against Proforma Invoice. Sorry no credits
Third Party Inspection (TPI) Allowed. Charges to be borne by buyer.
Test Certificate NABL Government approved laboratory reports can be provided.
Minimum Order Quantity 7000 Kilogram

Hollow Bar Mechanical Property Table

Steel grade Upper yield strength ReH min Mpa Tensile strength Rm min Mpa Elongation   in the longitudinal direction Minimum average absorbed energy KV, in. J at a   test temperature of – 20 °C
For TN in mm For TN in mm A min %
Name Number 16< 25< 40< 16< 25< 40<
T T= T= T= T=16 T= T= T=
N N N N N N N N
= 16 25 40 50 25 40 50
E355 1.0580 355 345 335 335 490 490 470 470 18 -
E355J2 1.0592 355 345 335 335 490 490 470 470 20 27
E420J2 1.0599 420 400 380 380 600 560 530 530 19 27
E470 1.0536 470 460 430 430 650 620 600 550 17 -
E590K2 1.0644 590 540 480 480 700 650 570 570 16 40

Chemical compostion

Spec Grade % (Max)
C Si Mn P S N Cr Ni Mo others
JIS G4304 sus316L 0.03 1 2 0.045 0.045   16.00-18.00 12.00-15.00 2.00-3.00 -
ASTM A240 316L 0.03 0.75 2 0.045 0.045 0.1 16.00-18.00 10.00-14.00 2.00-3.00 -
DIN 17440 1.4404 316L 0.03 1 2 0.045 0.045 0.1 16.50-18.50 10.00-13.00 2.00-3.00 -

Hollow Bar Chemical Composition Table

Steel grade C si Mn P S Cr max Mo max Ni max Al Cu max N Nb b Ti b V c
Name Number min max min max min max max min max min max Max max max min max
E355 d 1.0580 - 0,22 - 0,55 - 1,60 0,030 0,015 0,050 - - - - - - - - - - -
E355J2 1.0592 - 0,22 - 0,55 - 1,60 0,030 0,015 0,050 0,30 0,08 0,30 0,010 0,060 0,30 0,020 0,05 0,05 - 0,10
E420J2 1.0599 0,16 0,22 0,10 0,50 1,30 1,70 0,030 0,015 0,050 0,30 0,08 0,40 0,010 - 0,30 0,020 0,07 0,05 0,08 0,15
E470 1.0536 0,16 0,22 0,10 0,50 1,30 1,70 0,030 0,015 0,050 - - - 0,010 - - 0,020 0,07 - 0,08 0,15
E590K2 1.0644 0,16 0,22 0,10 0,50 1,30 1,70 0,030 0,015 0,050 0,30 0,08 0,40 0,010 - 0,30 0,020 0,07 0,05 0,08 0,15
a.  Elements not   included in this table shall not be intentionally added to the steel without   the agreement of the purchaser, except for elements which may be added for   finishing the cast. All appropriate measures shall be taken to prevent the   addition of undesirable elements from scrap or other materials used in the   steelmaking process.
b . The content of these elements   need not to be reported unless intentionally added to the cast.
c.  V may be replaced   by Nb or Ti percent for percent provided that the V content shall be at least   0,05 % and the sum V + Nb + Ti is £ 0,21 %. d Additions of Nb, V or Ti are permitted and left at   the discretion of the suppliers. The content of these elements shall be   reported

Wall Thickness Tolerances

Scope of Outer Diameter Ratio of Wall Thickness and Outer Diameter (WT/OD) Tolerance
102mm max / +/12.5% or +/-0.4mm (Chose the bigger one)
102mm min 0.05 max +/15% or +/-0.4mm (Chose the bigger one)
102mm min 0.05-0.10 +/12.5% or +/-0.4mm (Chose the bigger one)
102mm min 0.10 min (-10%, +12.5%)

Available Stock Hollow Bar Steel Grades

E470 HOLLOW BAR HOLLOW BARS TN 294-04
HOLLOW BAR EN 10294 BS/EN 10294-1 ALLOY STEEL HOLLOW BAR
EN 10294-1 GRADE E470 EN 10294-1 ALLOY HOLLOW BAR
EN10294-1 E355 BS EN10294 PART1 HOLLOW BARS

Carbon Hollow Bar to EN10294-1 Size Chart

OD ID OD ID OD ID OD ID OD ID OD ID
30 25 80 70 115 100 160 135 200 175 250 200
30 15 80 65 115 95 160 130 200 170 250 190
30 10 80 60 115 90 160 125 200 165 250 180
35 25 80 55 115 85 160 120 200 160 250 170
35 20 80 50 115 80 160 115 200 155 250 160
35 15 80 45 115 75 160 110 200 150 250 155
35 10 80 40 115 70 160 105 200 145 250 150
40 30 85 70 115 65 160 100 200 140 250 145
40 25 85 65 120 100 160 95 200 135 250 140
40 20 85 60 120 95 160 90 200 130 250 135
40 15 85 55 120 90 160 85 200 125 250 130
45 35 85 50 120 85 170 145 200 120 250 125
45 30 85 45 120 80 170 140 200 115 250 120
45 25 90 75 120 75 170 135 200 110
45 20 90 70 120 70 170 130 200 105
45 15 90 65 125 105 170 125 200 100
50 40 90 60 125 100 170 120 210 185
50 35 90 55 125 95 170 115 210 180
50 30 90 50 125 90 170 110 210 175
50 25 90 45 125 85 170 105 210 170
55 45 95 80 125 80 170 100 210 165
55 40 95 75 125 75 170 95 210 160
55 35 95 70 125 70 170 90 210 155
55 30 95 65 130 110 170 85 210 150
55 25 95 60 130 105 170 80 210 145
65 50 95 55 130 100 180 155 210 140
65 45 95 50 130 95 180 150 210 135
65 40 95 45 130 90 180 145 210 130
65 35 100 85 130 85 180 140 210 125
65 30 100 80 130 80 180 135 210 120
65 55 100 75 130 75 180 130 220 180
60 50 100 75 140 120 180 125 220 170
60 45 100 65 140 115 180 120 220 160
60 40 100 60 140 110 180 115 220 155
60 35 100 55 140 105 180 110 220 150
60 30 100 50 140 100 180 105 220 145
70 60 100 45 140 95 180 100 220 140
70 55 105 90 140 90 180 95 220 135
70 50 105 85 140 85 180 90 220 130
70 45 105 80 140 80 180 85 220 125
70 40 105 75 140 75 190 170 220 120
70 35 105 70 150 130 190 165 230 190
70 30 105 65 150 125 190 160 230 180
75 65 105 60 150 120 190 155 230 170
75 60 105 55 150 115 190 150 230 160
75 55 105 50 150 110 190 145 230 155
75 50 110 95 150 105 190 140 230 150
75 45 110 90 150 100 190 1358 230 145
75 40 110 85 150 95 190 130 230 140
75 35 110 80 150 90 190 125 230 135
110 75 150 85 190 120 230 130
110 70 190 115 230 125
110 65 190 110
110 60 190 105
190 100

ISO 2938 Hollow bar Dimension Chart

GUARANTeED DIMENSIONS
AFTER OD CHUCKING		 supplying
DIMENSIONS		 TOLERANCES GUARANTEED DIMENSIONS
AFTER ID CHUCKING
OD
max		 iD
min		 WT
nom		 OD WT AVERAGE
WEIGHT		 OD
min		 OD
max		 WT
min		 WT
max		 OD
max		 id
min
mm mm kg/m mm mm
20 5 30,8 6,2 3,8 30,6 30,9 5,7 6,7 29,3 19,2
30 15 7,5 30,8 8,9 4,8 30,6 30,9 8,2 9,6 28,9 13,8
25 5 35,8 6,2 4,5 35,6 35,9 5,7 6,7 33,7 24,2
35 20 7,5 35,8 8,9 5,9 35,6 35,9 8,2 9,6 33,9 18,8
30 5 40,8 6,2 5,3 40,6 40,9 5,7 6,7 38,7 29,1
40 25 7,5 40,8 8,9 7,0 40,6 40,9 8,2 9,6 38,6 23,8
35 5 45,8 6,2 6,1 45,6 45,9 5,7 6,7 43,7 34,0
45 30 7,5 45,8 8,9 8,1 45,6 45,9 8,2 9,6 43,9 28,8
25 10 45,8 11,6 9,8 45,6 45,9 10,7 12,5 43,6 23,5
35 7,5 51,3• 9,5 9,8 50,9 51,7 8,8 10,2 49,1 33,5
50 30 10 51,3• 12,2 11,8 50,9 51,7 11,3 13,1 48,7 28,2
40 7,5 56,8 9,7 11,3 56,4 57,2 9,0 10,4 54,0 38,5
55 35 10 56,8 12,4 13,6 56,4 57,2 11,5 13,3 53,7 33,2
30 12,5 56,8 15,1 15,5 56,4 57,2 14,0 16,2 53,4 27,8
45 7,5 61,2 9,4 12,0 60,8 61,6 8,7 10,1 59,0 43,5
60 40 10 61,2 12,1 14,7 60,8 61,6 11,2 13,0 58,7 38,2
35 12,5 61,2 14,8 16,9 60,8 61,6 13,7 15,9 58,3 32,8
50 7,5 66,8 9,8 13,7 66,4 67,2 9,0 10,5 64,0 48,5
45 10 66,8 12,5 16,7 66,4 67,2 11,5 13,4 63,7 43,2
65 40 12,5 66,8 15,2 19,3 66,4 67,2 14,0 16,3 63,4 37,8
35 15 66,8 17,8 21,4 66,4 67,2 16,9 18,7 66,8 32,4
55 7,5 71,4 9,5 14,5 71,0 71,8 8,8 10,2 69,1 53,5
50 10 71,4 12,2 17,8 71,0 71,8 11,3 13,1 68,7 48,2
70 45 12,5 71,4 14,6 20,4 71,0 71,8 13,8 15,3 68,6 43,4
40 15 71,4 17,2 23,0 71,0 71,8 16,3 18,1 68,3 38,2
35 17,5 71,4 20,2 25,5 71,0 71,8 19,2 21,2 67,9 33,2
60 7,5 76,2 9,4 15,5 75,8 76,6 8,7 10,1 74,1 58,5
75 55 10 76,2 12,1 19,1 75,8 76,6 11,2 13,0 73,7 53,2
• For dimensions highlighted by the minimum ordering quantity must be agreed at the time of order for Hollow Bar. Hollow bars TN 294-04 | 7

Products