DIN 2448 Pipe

  1. Products
  2. DIN 2448 Pipe

EN 10216-1 DIN 2448 Seamless Steel Pipe and Tubes supplier in India

Check EN 10216-1 DIN 2448 ST35/ ST 52/ ST 37 Seamless Tube size table, equivalent ASTM, dimensions, and standard

Din 2448 Seamless Pipe

Din 2448 Seamless Pipe

Din 2448 Steel Pipe

Din 2448 Steel Pipe

Din 2448 St 37

Din 2448 St 37

Din is a German institute for the standardization of various types of equipment in the piping system. The din 2448 grade is produced following all standards set by ASME, ASTM AISI, DIN, EN, GB, IS, and JIS. The pipes and tubes of this grade can be seamless, welded, fabricated, ERW, EFW, U bent, hollow, etc. The din 2448 standard sets various specifications for manufacturing these pipes and tubes. This includes dimensions, conventional masses per unit length, and couplings in addition to weights. A din 2448 pipe is designed with superior strength and excellent mechanical properties. These pipes show high resistance against reducing acids and all forms of corrosion. We are the leading manufacturers and suppliers of the din 2448 grade products in the country. We aim at supplying and producing the best products, which are available at reasonable rates.

The pipe din 2448 is designed to suffice in extreme pressures and elevated temperatures. These pipes are available in schedules between sch 5 to sch 160 and sch XXS. They are very easy to maintain and are very long-lasting. The din 2448 pipe dimensions for seamless pipes range between 4mm to 219mm and for welded and EFW pipes between 5mm to 1219.2mm. These dimensions can be customized on requirements. The pipe din 2448 dimensions for Welded tubes ranges between 6.35mm OD to 152mm OD and for seamless tubes between 3.35mm OD to 101.6mm OD. These pipes and tubes can be availed in plain, threaded and beveled tubing ends. The din 2448 pipe size table has a complete guide on the different sizes and grades within this 2248 grade of din. 

The din 2448 specification of pipe and tube can be availed in different chemical make-up, shapes, and sizes as per the requirements of our clients. All these products are produced under the strict guidance of our experienced workers. If you have any queries about our products or want to know more about the din2448, contact us for more information.

Table of content

Din 2448 Steel Pipe Specification

Standards Din 2448 Seamless Pipe
Din 2448 Seamless Pipe Size 4 to 219mm W. T.: 0.5 to 20mm
Din 2448 Welded Pipe Size 5.0 mm – 1219.2 mm
Din 2448 EFW Pipe size 5.0 mm – 1219.2 mm
Din 2448 Tube Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
Din 2448 Pipe Schedule SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Din 2448 Seamless Tube Size 3.35 mm OD To 101.6 mm OD
Din 2448 Welded Tube Size 6.35 mm OD To 152 mm OD
Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
Din 2448 Tube wall thickness 0.020" –0.220", (special wall thicknesses available)
Length Single Random, Double Random, Standard & Cut length Pipe & Tube
Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Form Round, Hydraulic, ‘U’ bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc
Type Welded, Seamless, ERW, EFW, Fabricated Pipe, ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc
End Plain End, Beveled End, Treaded Pipe & Tube
Marking All Din 2448 Seamless Pipe are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Application Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube
Value Added Service Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc.
Test Certificate Manufacturer Test Certificate 
Laboratory Test Certificate from Govt. Approved Lab. 
Under Third Party Inspection
We can also cut, thread, and groove Din 2448 Seamless Pipe to meet your specifications.

Tycoon Piping is one of the large suppliers for high-quality DIN 2448 Seamless Pipes. This standard applies to the dimensions and the conventional masses per unit length of seamless steel pipes according to the technical conditions of delivery as demand in DIN 1629 Part 1 to Part 4. DIN 17175 and DIN 17172. It also applies to conditions of delivery in which reference to this Standard is made. It defines that sector selected from DIN ISO 4200, within which steel seamless pipes are standardized. It is not applied to precision steel tubes according to DIN 2391. We offer a wide range of DIN 2448 st 52 Pipe in sizes and thicknesses to our clients

DIN 2448 ST37 Chemical Composition

DIN 2448 tuberia Suppliers in India, din 2448 st35, din 2448 st 35.8, din 2448 stainless steel

Grades Weld deoxidation type ( semi-killed steel only) RR special killed


 C% P% S% N% Addition of nitrogen binding elements e.g. min 0,020% total Al
DIN 2448 St37.0 R 0,17 0,040 0,040 0,009 -
DIN 2448 St44.0 R 0,21 0,040 0,040 0,009 -
DIN 2448 st 52 RR 0,22 0,040 0,035 - YES

DIN 2448 Mechanical Properties

Types Grades Upper yield limit Re min for wall thickness in mm min Tensile strength Rm MPa Elongation A% min
ROUND SEAMLESS CS PIPES FOR SPECIAL REQUIREMENTS
DIN St37.0, DIN St44.0, DIN St52.0
according to DIN 1629		 16 16 40 40 65 1 t
DIN 2448 St37.0 235 225 215 350-480 25 23
DIN 2448 St44.0 275 265 255 420-550 21 19
DIN 2448 st 52 355 345 335 50-650 21 19
We offer wide range of Din 2448 Seamless Pipe & Din 2448 St 37 at factory price.
Tycoon piping provide you with robust quality of Tubo Din 2448 & Din 2448 St 37 in a wide range

Products