Din 2440 St33 Steel Tube

Din EN 10305 Carbon Steel Tube Suppliers, Din 2440 St33 Steel Tube Dealer

Carbon Steel St 33.2 Tube Stockist, DIN 2440 ST33.2 Seamless Carbon Steel TUbe Exporters

Din 2440 St33 Steel Tube

Din 2440 St33 Steel Tube

ST33 Steel Tube

ST33 Steel Tube

Tubo St33

Tubo St33

Tycoon Piping is one of the large suppliers for high quality DIN 2440 ST33.2 seamless carbon steel pipe and tube. Carbon Steel DIN 2440 Grade St 33-2 Seamless Tubes are also known as MS (mild steel) pipes and tubes. DIN 2440 Grade St 33.2 Tubes are also low-cost Low Carbon Steel Tubes with carbon content with combination of manganese easy to form and shape. The pipes are manufactured as per DIN Specification and commercially referred as carbon steel pipes or mild steel pipes. Low Carbon Steel Pipes are not as hard as compared to high carbon steel pipes, though carburizing can increase its surface hardness. These pipes are used in the construction of boilers, pressure vessels, pipe-lines and equipment for service upto 600″ and at simultaneous high pressures, where the total stress and the relevant scaling conditions can raise or low the temperature limit.

Tycoon Piping is well known trader and dealer of DIN 2440 Grade ST33-2 tubes. DIN 2440 Grade ST 33.2 can be provided with Mill Standard Varnished, stencilled and bundle strapped with end caps fitted. Buy DIN 2440 Grade ST 33-2 Tubes at best price from us.

Table of content

DIN 2440 ST 33-2 Pipe Specification

Standard DIN 2440
Grade ST 33-2, ST33-2, ST 33.2
Outside Diameters 32-630mm
Wall Thickness 2.5-75mm
Length any length
Certification DIN 2440 Grade St 33-2 Carbon Steel Seamless Tubes are certified with Mill test Certificate in accordance with En 10204 Type 3.1/3.2. Where 3.2 indicates In-stage inspection by independent inspection agencies like TUV, DNV, BVQS, LLOYDS & EIL.
Testing Requirement IBR, NACE MR 0175,NACE MR 0103, HIC, IGC, IMPACT are adhered as supplementary testing requirements for DIN 2440 Grade St 33-2 which can be fulfilled with a government approved NABL laboratory.
Surface Protection DIN 2440 Grade St 33-2 Tubes are supplied in varnished condition in order to prevent formation of rust.

Chemical Composition of DIN 2440

Grade
Mfg. Process
DIN 2440 ST 33-2 Chemical composition
(%)
C
Si
Mn
P
S
Ni
Cr
Mo
Others
St33.2
S, W
rdf.DIN 17100
-
-
-
-
-
-
-

Equivaent Grades of Carbon Steel ST 33-2 Tubes

DIN 2440 ST 33-2 Equivalent Designation
DIN EN BS NFA ASTM ASME
DIN 2440 Grade St 33-2 - - - -

Mechanical properties of Carbon Steel ST 33-2

Grade
Tensile Test MPa or N/mm2
Remaks (Similar to JIS)Similar to KS
Possibility Temperature
Min Yield point
Tensile Strength
St33.2
-
-
(SGP)(SPP)

Sizes Chart of CS ST33

Sizes
ND
Outside Diameter, mm
OD Tolerances, mm
Wall Thickness, mm (±12,5%)
inch
mm
DIN 2440
1/8
6
10,2
+ 0,4; – 0,4
2,00
1/4
8
13,5
+ 0,5; – 0,3
2,35
3/8
10
17,2
+ 0,5; – 0,3
2,35
1/2
15
21,3
+ 0,5; – 0,3
2,65
3/4
20
26,9
+ 0,4; – 0,4
2,65
1
25
33,7
+ 0,5; – 0,4
3,25
1 1/4
32
42,4
+ 0,5; – 0,4
3,25
1 1/2
40
48,3
+ 0,5; – 0,4
3,25
2
50
60,3
+ 0,5; – 0,4
3,65
2 1/2
65
76,1
+ 0,5; – 0,8
3,65
3
80
88,9
+ 0,6; – 0,9
4,05
4
100
114,3
+ 0,7; – 1,2
4,50
5
125
139,7
+ 1,1; – 1,2

Other Types of DIN 2440 CS Tube

  • Carbon Steel DIN 2440 ST 33-2 Tube Supplier
  • DIN 2440 ST 33-2 High Precision Seamless Tube Supplier
  • DIN 2440 Grade St 33-2 Spiral Welded Tube
  • DIN 2440 ST 33-2 Steel Tube Supplier
  • DIN 2440 ST 33-2 Hot Drawn Seamless Tubes suppliers
  • DIN 2440 ST 33-2 Cold Drawn Seamless Tubes Supplier
  • DIN 2440 Grade St 33-2 Round Pipes
  • Carbon Steel DIN 2440 ST 33-2 Tube Supplier
  • DIN 2440 Grade St 33-2 Hollow Sections
  • DIN 2440 ST 33-2 Seamless Tube Distributor
  • DIN 2440 ST 33-2 Cold Drawn Carbon Seamless suppliers
  • DIN 2440 ST 33-2 Thin Wall Carbon Seamless Precision Tube suppliers
  • DIN 2440 ST 33-2 Cold Drawn Carbon Pipe Supplier
  • High Quality DIN 2440 ST 33-2 Tubes suppliers
  • DIN 2440 Grade St 33-2 Square Pipes
  • ST 33-2 Pipes suppliers
  • DIN 2440 ST 33-2 Precision Seamless Tube suppliers
  • DIN 2440 ST 33-2 Thick Wall High Precision Tube Supplier
  • DIN 2440 ST 33-2 Steel Pipes suppliers
  • DIN 2440 ST 33-2 Pipes suppliers
  • DIN 2440 Grade St 33-2 Boom Tube
  • DIN 2440 Grade ST 33-2 Welded Pipes

ST 33.2 Tube OD/Wall tolerance

Outer diameter and wall Thickness
Execution Size Range OD Tolerance Wall tolerance
DIN 2440 ST33-2 Hot-rolled Tube OD – 80 mmOD > 80 mmWall ± 0.4 mm± 0.5 % of OD ± 0.7 mm± (5 % x wallthickness + 0.1 mm
DIN 2440 ST33-2 Hot-rolled peeled tube All sizesWall + 0.25/- 0 mm ± 0.8 mm± (5 % x wall thickness+ 0.2 mm)
DIN 2440 ST33-2 Cold Worked tubecold-rolled or cold-drawn OD 80 Wall Thickness 8 + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* ± 0.30 mm± 0.35 mm± 0.40 mm

Dimensional of Carbon Steel Grade ST 33-2 Tubes

* Referred to an average length of 6m

Nom-inal width Nominal width of asso-ciated fittings acc.to DIN 2950 and DIN 2980 Inch Whit-Worth pipe thread acc. DIN 2999 DIN 2440 ST33-2 Tube Thread Companion Socket According to DIN 2986
Out side dia-meter d2 wall thick- ness a Weight of plain tube Kg/m Weight of tube including socket Kg/m Theo-retical thread diameter d Thread Per Inch Useful thread Length d min.for a max. Distance of thread diameter d from tube and OUT- side dia- meter min. Len-gth min.
a max. a min.
15 1/2 R 1/2" 21.3 2.65 1.22 1.23 20.955 14 15.0 10.0 6.4 26.4 34
20 2/4 R 3/4" 26.9 2.65 1.58 1.59 26.441 14 16.3 11.3 7.7 31.8 36
25 1 R 1" 33.7 3.25 2.44 2.46 33.294 11 19.1 12.7 8.1 39.5 43
32 1 1/4 R 1 1/4" 42.4 3.25 3.14 3.17 41.910 11 21.4 15.0 10.4 48.3 48
40 1 1/2 R 1 1/2" 48.3 3.25 3.61 3.65 47.803 11 21.4 15.0 10.4 54.5 48
50 2 R 2" 60.3 3.65 5.1 5.17 59.614 11 25.7 18.2 13.6 66.3 56
65 2 1/2 R 2 1/2 76.1 3.65 6.51 6.63 75.184 11 30.2 21.0 14 82 65
80 3 R 3 88.9 4.05 8.47 8.64 87.884 11 33.3 24.1 17.1 95 71
100 4 R 4 114.3 4.5 12.1 12.4 113.030 11 39.3 28.9 21.9 122 83
125 5 R 5 139.7 4.85 16.2 16.7 138.430 11 43.6 32.1 25.1 147 92
150 6 R 6 165.1 4.85 19.2 19.8 163.830 11 43.6 32.1 25.1 174 92

Price of DIN 2440 ST 33-2 Pipes

  • DIN 2440 ST 33-2 Pipes and Tubes
    US $200-800 / Ton
  • DIN 2440 ST 33-2 Seamless Tubes
    US $500-1000 / Ton
  • DIN 2440 ST 33-2 Cold Drawn Carbon Seamless Steel Tube
    US $500-700 / Ton
  • DIN2440 ST 33-2 Cold Drawn Precision Seamless Steel Tubes
    US $1500 /Metric Ton
  • DIN 2440 ST 33-2 Round Tube
    US $700-1100 / Ton
  • DIN 2440 ST 33-2 Hot Drawn Seamless Tube
    US $1-50/ kilogram
  • suppliers of ST 33-2 Precision Seamless Steel Tube US $790-950 / Ton
  • DIN 2440 ST 33-2 Steel Tube US $525-595 / Ton
  • DIN 2440 ST 33-2 Cold Drawn Carbon Steel Pipe and tubes for sale
    US $500-900 / Ton
  • DIN 2440 ST 33-2 Hydraulic Seamless Tube
    US $300-700 / Ton
  • DIN 2440 ST 33-2 Carbon steel seamless tubes
    US $780.0-850.0 / Ton

Products