Din 17175 St35.8 Tubes

Boiler Tube Din 17175 Suppliers, Tuberia Din 17175 Exporters

Din 17175 Grade St35.8 Stockist, Din 17175 Pipe & Tubo Din 17175 Dealer

Din 17175 St35.8 Tubes

Din 17175 St35.8 Tubes

Din 17175 Pipe

Din 17175 Pipe

Tuberia Din 17175

Tuberia Din 17175

Tycoon Piping is one of the large exporters & suppliers for high quality DIN 17175 Tubed. DIN 17175 seamless boiler tubes is widely used in petroleum, boiler industry, heat preservation, chemical fiber, chemical industry, medicine, machinery, paper, mechanical equipment, refrigeration, food, electricity, water, aerospace, construction, aviation, marine, shipbuilding, environmental protection and boiler heat exchangerstubes. DIN 17175 Seamless boiler tubes in same way used for producing storage tanks of heat-resistant steels used in tool making and boiler making industries and for constructing pressure reservoirs.

DIN 17175 Seamless steel boiler tubes is specially used as heating surface tubes in low and medium pressure boilers tubes(The working pressure is not more than 5.88 Mpa and the significant temperature is below 450 degree celsius). The Outer dimension of DIN 17175 tubes is from 6.0 mm to 219 mm & Wall thickness is ranges from 1 mm to 30 mm. We supply different grades of seamless boiler tubes, such as DIN 17175 St35.8, DIN 17175 St45.8, DIN 17175 15Mo3, DIN 17175 13CrMo44, DIN 17175 10CrMo910.

Table of content

Din 17175 St35.8 Tubes Specification

Standards Din 17175 St35.8 Tubes
Din 17175 St35.8 Seamless Pipe Size 4 to 219mm W. T.: 0.5 to 20mm
Din 17175 St35.8 Welded Pipe Size 5.0 mm – 1219.2 mm
Din 17175 St35.8 EFW Pipe size 5.0 mm – 1219.2 mm
Din 17175 St35.8 Tube Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
Din 17175 St35.8 Pipe Schedule SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Din 17175 St35.8 Seamless Tube Size 3.35 mm OD To 101.6 mm OD
Din 17175 St35.8 Welded Tube Size 6.35 mm OD To 152 mm OD
Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
Din 17175 St35.8 Tube wall thickness 0.020" –0.220", (special wall thicknesses available)
Length Single Random, Double Random, Standard & Cut length Pipe & Tube
Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Form Round, Hydraulic, ‘U’ bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc
Type Welded, Seamless, ERW, EFW, Fabricated Pipe, ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc
End Plain End, Beveled End, Treaded Pipe & Tube
Marking All Din 17175 St35.8 Tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Application Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube
Value Added Service Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc.
Test Certificate Manufacturer Test Certificate 
Laboratory Test Certificate from Govt. Approved Lab. 
Under Third Party Inspection
We can also cut, thread, and groove Din 17175 St35.8 Tubes to meet your specifications.

DIN 17175 Boiler Tubes Chemical Composition

Standard Grade Chemical Composition Limits (%)
C Si Mn P、S Cr Mo
DIN 17175 DIN 17175 St35.8 ≤ 0.17 0.10-0.35 0.40-0.80 ≤ 0.030 / /
DIN 17175 St45.8 ≤ 0.21 0.10-0.35 0.40-1.20 ≤ 0.030 / /
DIN 17175 15Mo3 0.12-0.20 0.10-0.35 0.40-0.80 ≤ 0.030 / 0.25-0.35
DIN 17175 13CrMo44 0.10-0.18 0.10-0.35 0.40-0.70 ≤ 0.030 0.70-1.10 0.45-0.65
DIN 17175 10CrMo910 0.08-0.15 ≤ 0.50 0.40-0.70 ≤ 0.030 2.00-2.50 0.90-1.20

DIN 17175 Tubes Standard Mechanical Properties

Standard Grade Tensile Strength (MPa) Yield Strength (MPa) Elongation (%)
DIN 17175 DIN 17175 St35.8 360-480 ≥ 235 ≥ 25
DIN 17175 St45.8 410-530 ≥ 255 ≥ 21
DIN 17175 15Mo3 450-600 ≥ 270 ≥ 20
DIN 17175 13CrMo44 440-590 ≥ 290 ≥ 20
DIN 17175 10CrMo910 450-600 ≥ 280 ≥ 18
We offer wide range of Din 17175 Grade I St 35.8, Din 17175 Pipe & Tubo Din 17175 at factory price.
Tycoon piping provide you with robust quality of Boiler Tube Din 17175 & Din 17175 St35.8 Tubes in a wide range