DIN 17172 StE 360.7 Pipe

  1. Products
  2. DIN 17172 StE 360.7 Pipe

DIN 17172 Seamless Pipe Suppliers, DIN 17172 Large Diameter Pipe

DIN 17172 StE 360.7 Steel Pipe Exporter, DIN 17172 Grade StE 360-7 Carbon Steel Pipes

DIN 17172 StE 360.7 Pipe

DIN 17172 StE 360.7 Pipe

DIN 17172 Grade ste 360.7

DIN 17172 Grade ste 360.7

DIN 17172 Seamless Pipe

DIN 17172 Seamless Pipe

Tycoon Piping is one of the large suppliers for high quality DIN 17172 Grade StE 360-7. DIN 17172 Grade StE 360-7 Carbon Steel Seamless Pipes are also known as mild steel(ms) pipes and tubes. DIN 17172 Grade StE 360-7 Pipes are low cost Low Carbon Steel Pipes with max of 22% carbon content with combination of 90% – 150% manganese easy to form and shape. The pipes are manufactured as per DIN Specification and commercially referred as carbon steel pipes or mild steel pipes. Low CS Pipes are not as hard as hig cs pipes, though carburizing can increase its surface hardness.

Pipes are been supplied in both Plain Square cut or Bevelled End. Each Bundle is packed according to the client's requirement for export orders.

Table of content

DIN 17172 StE 360.7 Pipe Specification

Standards DIN 17172 StE 360.7 Pipe
DIN 17172 StE 360.7 Seamless Pipe Size 4 to 219mm W. T.: 0.5 to 20mm
DIN 17172 StE 360.7 Welded Pipe Size 5.0 mm – 1219.2 mm
DIN 17172 StE 360.7 EFW Pipe size 5.0 mm – 1219.2 mm
DIN 17172 StE 360.7 Tube Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
DIN 17172 StE 360.7 Pipe Schedule SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
DIN 17172 StE 360.7 Seamless Tube Size 3.35 mm OD To 101.6 mm OD
DIN 17172 StE 360.7 Welded Tube Size 6.35 mm OD To 152 mm OD
Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
DIN 17172 StE 360.7 Tube wall thickness 0.020" –0.220", (special wall thicknesses available)
Length Single Random, Double Random, Standard & Cut length Pipe & Tube
Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Form Round, Hydraulic, ‘U’ bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc
Type Welded, Seamless, ERW, EFW, Fabricated Pipe, ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc
End Plain End, Beveled End, Treaded Pipe & Tube
Marking All DIN 17172 StE 360.7 Pipe are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Application Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube
Value Added Service Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc.
Test Certificate Manufacturer Test Certificate 
Laboratory Test Certificate from Govt. Approved Lab. 
Under Third Party Inspection
We can also cut, thread, and groove DIN 17172 StE 360.7 Pipe to meet your specifications.

DIN 17172 Ste 360-7 Chemical Composition

Carbon Silicon Manganese Phosphorous Sulphur Molybdenum Nickel Chromium Copper Others
max 0.22 max 0.55 0.90 – 1.50 0.04 0.035 – – – – –

DIN 17172 mechanical properties

Yield Strength Tensile Strength Elongation A5 min
MPa min ksi min MPa min MPa min ksi min Percentage
630 – – 20

We offer wide range of DIN 17172 StE 360.7 Steel Pipe, DIN 17172 Seamless Pipe & DIN 17172 Large Diameter Pipe at factory price.
Tycoon piping provide you with robust quality of DIN 17172 ste 360.7 Pipe & DIN 17172 Grade StE 360-7 Carbon Steel Seamless Pipes in a wide range

Products