DIN EN 1628 Tube

  1. Products
  2. DIN EN 1628 Tube

DIN 1628 St52.4 Welded Steel Tubes Supplier, DIN 1628 St 44.4 Tubes Exporter

DIN EN 1628-2 Tube Stockist, DIN EN ISO 1628-4 & DIN 1628 St 44.4 Tubes Dealer

DIN EN 1628 Tube

DIN EN 1628 Tube

DIN 1628 ST37.4 Tube

DIN 1628 ST37.4 Tube

DIN 1628 Grade St52.4 tube

Tycoon Piping is one of the large suppliers for high quality DIN 1628 Material. DIN 1628 ST37.4 steel tubes are mainly used in the construction of vessels, chemical plants, pipework and for general mechanical engineering purpose. The St37.4 steel tubes of DIN 1628 are designed to meet the high performance requirements. Normally, there are no limiting values for the maximum permission working pressure of DIN 1628 Grade ST37.4 welded steel tubes. The permissible working pressure shall not go beyond 300°C.

The Welded tube conforming to din 1628 with an Outside Diameter(O.D.) of 114.3 mm and Wall Thickness(W.T.) of 3.2 mm, made from Din 1628 st44.4 steel(material number 1.0257) in the normalized condition(n) shall designated as “tubes din 1628 - st44.4 n” or “tubes din 1628 - 1.0257 n”. The Grade St52.4 steel tubes of DIN 1628 are designed to meet high performance requirements. There are no limiting values for the maximum permission working pressure of DIN 1628 Grade ST52.4 welded steel tubes. The permissible working pressure shall not go beyond 300°C.

Table of content

DIN EN 1628 Tube Specification

Standards DIN EN 1628 Tube
DIN EN 1628 Seamless Pipe Size 4 to 219mm W. T.: 0.5 to 20mm
DIN EN 1628 Welded Pipe Size 5.0 mm – 1219.2 mm
DIN EN 1628 EFW Pipe size 5.0 mm – 1219.2 mm
DIN EN 1628 Tube Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
DIN EN 1628 Pipe Schedule SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
DIN EN 1628 Seamless Tube Size 3.35 mm OD To 101.6 mm OD
DIN EN 1628 Welded Tube Size 6.35 mm OD To 152 mm OD
Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
DIN EN 1628 Tube wall thickness 0.020" –0.220", (special wall thicknesses available)
Length Single Random, Double Random, Standard & Cut length Pipe & Tube
Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Form Round, Hydraulic, ‘U’ bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc
Type Welded, Seamless, ERW, EFW, Fabricated Pipe, ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc
End Plain End, Beveled End, Treaded Pipe & Tube
Marking All DIN EN 1628 Tube are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Application Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube
Value Added Service Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc.
Test Certificate Manufacturer Test Certificate 
Laboratory Test Certificate from Govt. Approved Lab. 
Under Third Party Inspection
We can also cut, thread, and groove DIN EN 1628 Tube to meet your specifications.

DIN 1628 St37.4 Tubes Chemical Composition

Steel grade Type of deoxidation
(RR, fully killed)		 Chemical composition, % by mass
Symbol Material Number C
max		 Si
max		 Mn
max		 P
max		 S
max		 Addition of nitrogen fixing elements
(e.g. not less than 0.020 % Al total)
Din 1628 St37.4 1.0255 RR 0.17 0.35 ≥0.35 0.040 0.040 Yes
Din 1628 St44.4 1.0257 RR 0.20 0.35 ≥0.40 0.040 0.040 Yes
Din 1628 St52.4 1.0581 RR 0.22 0.55 ≥1.60 0.040 0.035 Yes

DIN 1628 St 52.4 Tube Mechanical Properties

Steel grade Upper yield stress
ReH
for wall thicknesses,
in mm		 Tensile Strength
Rm
N/mm2		 Elongation after fracture
N/mm2
min		 Diameter of
bending mandrel
for the bend test
on fusion
welded tubes 1)
N/mm2		 Impact energy 2)
of the parent metal
(ISO V-match test pieces
AT + 20°C
Symbol Material Number up to 16 over 16 upto 40 Longitudinal Transverse Longitudinal Transverse 3)
N/mm2
min		 %
min		 %
min
Din 1628 St 37.4 1.0255 235 255 350 5) to 480 25 23 2 s 43 27
Din 1628 St 44.4 1.0257 275 4) 265 4) 420 5) to 550 21 19 3 s 43 27
Din 1628 St 52.4 1.0581 355 345 500 5) to 650 21 19 4 s 43 27
1) s is the wail thickness of tube (see sub clause 5.5.5).
2) Average value from three tests; only one individual value may fall short of the specified minimum value by not more than 30 %
3) These values apply also if the impact energy is tested in the center of the weld for tubes having outside diameters exceeding 500 mm, and wall thicknesses not smaller than 10mm.
4) For cold finished tubes in the NBK condition (annealed above the upper transformation point under shielding gas or in a vacuum), minimum values of yield stress lower than these values by 20N/mm2 are permitted.
5) For cold finished in the NBK condition, minimum values of tensile strength lower than these values by 10N/mm2 are permitted.

Stockholder Of Din 1628 St 52 Welded Steel Tubes In India, Exporter Of Din 1628 St37.4 ERW Tube In India.

  • DIN 1628 TUBES EN ISO 1628-1
  • DIN 1628 TUBES EN ISO 1628-5
  • DIN 1628 TUBES EN ISO 1628-2
  • DIN 1628 ST37.4 TUBES
  • DIN 1628 TUBES EN ISO 1628-4
  • DIN EN 1628-2 TUBES
  • DIN 1628-1 TUBES
  • DIN 1628 ST44.4 TUBES
We offer wide range of DIN 1628 Grade St52.4 tube, DIN 1628 Welded Circular Tube & DIN EN 1628-2 Tube at factory price.
Distributor Of Class 52 Di Pipes, Di Class 53 Pipes, Di pipes line, Di class 52 pipes, DIN EN 1628 Tube & Din 1628 Welded Circular Tube In India.

Products