K7 Ductile Iron Pipe

Ductile Iron pipe Class K7, Di K7 Water Pipes Suppliers in India

Get K7 Ductile Iron Pipe & Ductile Iron Pipe Class K7 Price

K7 Ductile Iron Pipe

K7 Ductile Iron Pipe

K7 socket and spigot pipes

K7 socket and spigot pipes

Di k7 water pipes

Di k7 water pipes

These pipes are ductile iron pipes, which are coated with a layer of highly refined and regulated asphaltic paint. This enables these pipes to possess superior corrosion and erosion resistance properties in different environments. The Di K7 pipes price list is dependent on the concentration of this paint along with thickness, nominal sizes, and pressure rating of the pipe along with a few other parameters. The Di K7 pipe is widely used in the transmission of water for drinking, irrigation, and industrial processes. These pipes have superior dimensional accuracy and are very reliable. This is what validates the Di K7 pipe price. The versatile nature of these pipes makes them very desirable and makes them a scarce commodity in the piping markets. The di K7 pipe specification is available with superior mechanical properties along with enhanced hardness. The density of most pipes in this specification is around 7050 Kg/m2. The Di K7 pipes specifications are based on the tolerances, thickness, outside diameters, maximum and minimum working pressures, and so on. For a detailed overview of the Di K7 pipes specifications, check our website.

The di pipe class dictates most of the factors from weight, pressure, specifications, dimensions, and the overall pricing of the entire grade of ductile iron pipes. The Di K7 pipe pressure rating dictates the different pressures, which these pipes can suffice. Most di pipes can suffice in moderate-high and low-pressure systems. The Di K7 pipes pressure rating is less in comparison to the K9 grade. The rating is based on 3 preferred classes C40 (lower pressure class), C30 (medium pressure class), and C25 (High-pressure class). In the Di K7, pipe pressure rating is directly or indirectly dependant on the nominal diameter and thickness of the pipes along with the 3 pressure classes. The weight calculator can be used to calculate the Di K7 pipe weight per foot. It is calculated by using the wall thickness of the pipe along with the diameter of the pipe. Calculating the weight helps lay down the foundation of your piping system. Selecting the right di K7 pipe weight is an important necessity. A lighter-weight pipe may not be able to withstand extreme pressure while a heavier pipe may not have the right flexibility. The Di K7 pipe weight per meter is dependent on the wall thickness, dimensions, material grade, outer diameter, and other specifications and dimensions of the pipe. Refer to the Di K7 pipe weight chart at the end of this page or on our website. This chart will give you a detailed overview of the weight of each pipe.

The Di K7 pipe weight chart can be downloaded by visiting our website. Refer to this carefully and select the right pipe to meet all your piping requirements in the system. The Di K7 pipes price list per unit of 100mm starts at Rs 856 for K9 pipes and Rs 747 for K7 pipes. As the sizes of this ductile iron pipe increase, so do the prices as well. The Jindal di pipes are manufactured, making use of the best raw materials and innovative technology along with all other products within this grade. All our products including, the di pipe k7, can be easily customized as per your requirements in different shapes and sizes. If you have any queries or want to know more about our k7 di pipe, contact us for more information.

Table of content

Class K7 Ductile Iron Pipes Specifications

Product Name Self anchored ductile iron pipe, Ductile Iron Pipe with Spigot & Socket
Specifications ASTM A377 Ductile Iron Pipes, AASHTO M64 Cast Iron Culvert Pipes
Standard ISO2531, EN545, EN598
Material Ductile Iron GGG 50
Ductile Iron Class 7 Main Products Dci, Ductile Iron, Pipe, Ductile Cast Iron Pipe, Dci Pipe, Ductile Iron Pipe
Ductile Iron Pipe Class K7 C20, C25, C30, C40, C64, C50, C100 & Class K7, K9 & K12
Ductile Iron Class 7 Standard sizes DN 80 mm to DN 2000 mm (including DN 125 & DN 750)
External Coating Red / Blue Epoxy or Black Bitumen, Zn & Zn-AI Coatings, Metallic Zinc (130 gm/m2 or 200 gm/m2 or 400 gm/m2 as per the customer’s requirements) complying to relevant ISO, IS, BS EN standards with a finishing layer of Epoxy Coating / Black Bitumen(minimum thickness 70 micron) as per the customer’s requirements.
Ductile Iron Class 7 Available joint method T type; Mechanical joint k type; Self-anchor
Internal Coating Cement Lining of OPC/ SRC/ BFSC/ HAC Cement mortar lining as per requirement with ordinary Portland Cement and Sulphate Resisting Cement conforming to relevant IS, ISO, BS EN standards.
Coating Metallic zinc spray with Bituminous Coating (Outside) Cement mortar lining (Inside).
Class 7 Ductile Iron Application Ductile cast iron are mainly used for transferring waste water, drinkable water and for irrigation.

Tycoon Piping is one of the large suppliers for high-quality Ductile Iron Pipe Class K7. Ductile Iron Class K7 Pipes can deal with less pressure than Ductile Iron Class K9 Pipes. The pressure rating of K7 ductile iron pipes & Ductile Iron Pipe Class K7 varies and this would base on the Nominal Wall Thickness and the Nominal Diameter of the pipe. The weight of would differ as this would be dependent on the size of the pipe. The number ‘7’ in Class K7 implies pressure class of the Ductile Iron Pipe Class K7 and 7 represents the pipe’s internal pressure withstanding capacity.

Ductile iron pipe specification is as per the following ANSI/AWWA C104/A21.4, ANSI/AWWA C150/A21.50, ANSI/AWWA C111/A21.11, ANSI/AWWA C151/A21.51, ANSI/AWWA C116/A21.16, ANSI/AWWA C105/A21.5, ANSI/AWWA C600, ANSI/AWWA C115/A21.15, ANSI/AWWA C153/A21.53, and ANSI/AWWA C110/A21.10. Di K7 pipe specifications would vary due to the basic thickness and the dimension of the ductile iron pipes.

We are exporing Class K7 Ductile Iron Pipes, Ductile Iron Pipe Class K7 & K7 Class water pipes at great price due to reasonable man hours in India and good source of high quality K7 socket and spigot pipes at best price available in Mumbai, India. Tycoon Piping is Stockist of DN 1100 & DN 1200 Ductile Iron Pipes approved by Saudi Aramco. We Maintain an accurate stock of K7 Ductile Iron Pipe. Tycoon Piping contain a full range of Ductile Iron Pipe Class K7 in Stock in various sizes. If you are looking to buy K7 ductile iron pipe at best price in India, check our price of di k7 Gas pipes including Ductile Iron Pipe Class K7 and K7 socket and spigot pipes. Call us or mail to sales@tycoonpiping.com for Latest & Updated price List of DN 1100 & DN 1200 Ductile Iron Pipes, Ductile Iron Pipe Class K7 and K7 ductile iron pipe. Our dealer near you will contact you and will provide full information about Di K7 Pipe.

Tycoon Piping is supplying Ductile Iron Pipe Class K7 & K7 Ductile Iron Pipe to Germany, Canada, Sweden, Egypt, Israel, Russia, Bahrain, Kuwait, Singapore, Turkey, UAE, UK, Italy, Indonesia, France, Malaysia, Australia, Qatar, Thailand, Oman, Sri-Lanka, USA, Iran & Saudi Arabia.

Class K7 Ductile Iron Pipes Properties

Properties K7 Ductile Iron Pipe
Elongation (min) at break 10%
Tensile strength Min. 420 MPa
Modulus of Elasticity 1.7 x 1010 Kg/M2
Hardness Max. 230 BHN

Class K7 Ductile Iron Pipes Dimension

Nominal Dia of Pipe ‘DN’ External Diameter ‘DE’ Barrel Wall Thickness ‘e’
K7 K7
mm mm mm
80 98 5.0
100 118 5.0
125 144 5.0
150 170 5.0
200 222 5.0
250 274 5.3
300 326 5.6
350 378 6.0
400 429 6.3
450 480 6.6
500 532 7.0
600 635 7.7
700 738 9.0
750 790 9.7
800 842 10.4
900 945 11.2
1000 1048 12.0
1100 1152 14.4
1200 1255 15.3

Ductile Iron Class K7 Pipes Pressure Rating

Nominal Diameter DN (mm) Pressure Class
Preferred Class Nominal Thickness
80 C40 4.4
100 C40 4.4
150 C40 4.5
200 C40 4.7
250 C40 5.5
300 C40 6.2
350 C30 6.3
400 C30 6.5
450 C30 6.9
500 C30 7.5
600 C30 8.7
700 C25 8.8
800 C25 9.6

Class K7 Ductile Iron Pipes Price List

Size Price Per Unit
100 mm
₹747.00
150 mm
₹1,090.00
200 mm
₹1,362.00
250 mm
₹1,716.00
300 mm
₹2,285.00
350 mm
₹2,800.00
400 mm
₹3,368.00
450 mm
₹3,952.00
500 mm
₹4,642.00
600 mm
₹6,100.00
The material we are supplying Ductile Iron Pipe Class K7 can be used in materials for the petrochemical, oil, gas and allied industries.
Looking to buy Class K7 Ductile Iron Pipes? contact Tycoon Piping, A reliable K7 ductile iron pipe supplier in India.