ASTM A554 Stainless Steel Pipe

A554 Round Tube Suppliers, ASME Sa 554 Square Tube Exporters

ASTM a554 Aisi 304 Tubing Stock, tubo ASTM a554 & Astm A554 Stainless Steel Tubing Dealer

ASTM A554 Stainless Steel Pipe

ASTM A554 Stainless Steel Pipe

A554 Seamless Tube

A554 TP304 Seamless Tube

TP316L Welded Tube

TP316L Welded Tube

Tycoon Piping is one of the large suppliers & exporters for high quality ASTM A554 / ASME SA554 Tubes. ASTM A554 specification covers ferritic, welded austenitic and austenitic-ferritic duplex stainless steel mechanical tubing intended for use in structural, ornamental, exhaust and other applications where mechanical properties, appearance, or corrosion resistance is needed. ASME SA554 Tubing is commonly shipped without protective coating. ASTM A554 specification covers as welded or cold-reduced mechanical tubing in sizes to 16 inch (406.4 mm) outside dimension and in wall thicknesses 0.020 inch (0.51 mm). ASTM A554 Welded Mechanical Tubing made from flat-rolled steel by an automatic welding process without the addition of filler metal. ASTM A554 Tubes furnished in one of the following shapes - square, round, rectangular, or special.

Heat analysis performed in ASTM A554 several grades of steel shall confirm to the required chemical composition for manganese, phosphorus, silicon, carbon, sulfur, nickel, columbium, titanium, molybdenum, chromium, and tantalum. For ASTM A554 small diameter or thin walls, or both, where many drawing passes are required a carbon content of 0.040% maximum is necessary in grades MT-304L and MT-316L. ASTM A554 Small outside diameter tubes are defined as those less than 0.500 inch(12.7 mm) in outside diameter and light wall tubes as those less than 0.049 inch(1.24 mm) in average wall thickness.

Table of content

ASTM A554 Seamless Steel Tubing Specifications

Specification ASTM A554/ ASME SA554
Grades ASTM A554 (MT316/316L, MT304/304L), JIS G3446 (SUS316TK, SUS304TK), CNS 5802 (304TK, 316TK), (YC1)
Size 6 NB to 1200 NB IN
Outer Diameter Size 9.5mm ~ 139.7mm
Wall Thickness 0.6 ~ 3.05mm
Schedule SCH. 5, 10, 60, 20, 30, 40, 80, 100, 120, 140, 160, XXS.
Method TIG or TIG + Plasma or Laser
Finish 2B Mill Finish , No.4 finish, 400 Grit Finish, BA Finish, 550 Grit Finish, 600 Grit Finish
Length Single Random, Double Random & Cut Length
Types Square, Rectangle, Round, Coil, "U" Shape, Hydraulic & Honed Tubes
Products ASTM A554 L Polished Tubes, ASTM A554 Stainless Steel Polished Tubes, ASTM A554 TP316 No.4 Finish Tube, ASTM A554 TP316L Polished Tubes, ASTM A554 Tubing, ASTM A554 Welded Polished Tubes, ASTM A554 TP201 Welded Mechanical Tubing, ASTM A554 TP316L Mirror Polished Austenitic Stainless Steel Tubings for Decoration, ASTM A554 TP316 Stainless Steel Square Tube, ASTM A554 Square Tube

ASTM A554 Steel Tubing Chemical Composition

ASTM A554 TUBING GRADES UNS C Mn P S Si Cr Ni Mo Ti Nb N
ASTM A554 S30400 0.08 2 0.045 0.03 1 18.0-20.0 8.0-11.0
ASTM A554 L S30403 0.035 2 0.045 0.03 1 18.0-20.0 8.0-13.0
ASTM A554 316 S3160 0.08 2 0.045 0.03 1 16.0-18.0 11.0-14.0 2.0-3.0
ASTM A554 316L S31603 0.035 2 0.045 0.03 1 16.0-18.0 10.0-14.0 2.0-3.0

A554 Steel Tubing Mechanical Properties

Material Heat Temperure Tensile Strength Yield Strength Elongation %, Min
Treatment Min.º F(º C) Ksi (MPa), Min. Ksi (MPa), Min.
ASTM A554 Solution 1900 (1040) 75(515) 30(205) 35
ASTM A554 L Solution 1900 (1040) 70(485) 25(170) 35
ASME SA554 316 Solution 1900(1040) 75(515) 30(205) 35
ASTM A554 316L Solution 1900(1040) 70(485) 25(170) 35

ASTM A554 Steel Tube Weight Chart

DIMENSIONS OF ASTM A554 WELDED MECHANICAL TUBING OUTSIDE AND INSIDE DIAMETER OR WALL

OD Size, in. (mm)

OD, ±in.

mm

ID, ±in.

mm

Up to 3⁄32 (2.4), excl

0.001

0.03

0.001

0.03

3⁄32 to 3⁄16 (2.4 to 4.8), excl

0.0015

0.038

0.0015

0.038

3⁄16 to 1⁄2 (4.8 to 12.7), excl

0.003

0.08

0.005

0.13

1⁄2 to 1 (12.7 to 25.4), excl

0.004

0.10

0.006

0.15

1 to 11⁄2 (25.4 to 38.1),excl

0.005

0.13

0.007

0.18

1 1⁄2 to 2 (38.1 to 50.8),excl

0.006

0.15

0.008

0.20

2 to 2 1⁄2 (50.8 to 63.5),excl

0.007

0.18

0.010

0.25

2 1⁄2 to 3 1⁄2 (63.5 to 88.9),excl

0.010

0.25

0.014

0.36

3 1⁄2 to 5 (88.9 to 127.0),incl

0.015

0.38

0.020

0.51

Over 5 to 16 (127.0 to 406.4), incl

0.00125 in./in. or mm/mm of cir-cumference

0.0013 in./in. or mm/mm of cir-cumference


ASTM A554 TP304 Stainless Steel Square Tube Dimensions
Tube Thickness (mm)
Outside Diameter
(in)
Outside Diameter
(mm)
0.6 0.7 0.8 0.9 1.0 1.2-1.25 1.5 1.6-1.65 2.0-2.11 2.5 3.0-3.05 4.00 5.00 6.00
1/2"x 1/2" 12.7x 12.7
- 15.0x 15.0
- 18.0x 18.0
3/4''x 3/4' 19.0x 19.0
- 20.0x 20.0
- 25.0x 25.0
1"x 1" 25.4x 25.4
- 30.0x 30.0
1 1/4"x 1 1/4" 31.8x 31.8
1 1/2"x 1 1/2" 38.1x 38.1
- 40.0x 40.0
- 50.0x 50.0
2"x 2" 50.8x 50.8
- 60.0x 60.0
- 70.0x 70.0
- 75.0x 75.0
- 80.0x 80.0
- 90.0x 90.0
- 100x 100
Remark (1)Marking:Product SPEC.
(2)Finish : ( ☆: Polish#180#320) ; (△ : Polish #180#320#400)

ASTM A554 Square Stainless Steel Tubing - Sizes & Weights per foot
ASTM A554 Polished Square Tubing
Gauge 18 16 14 11 7 1/4 3/8
Inches 0.049 0.065 0.083 0.120 0.180 0.250 0.375
1/2 0.30 0.39
5/8 0.38 0.40
3/4 0.50 65.00 0.81 1.13
1 0.63 0.83 1.03 1.45 2.17
1-1/4 0.82 1.08 1.37 1.93 2.99
1-1/2 0.97 1.27 1.61 2.26 3.63 4.41
1-3/4 1.13 1.49 1.88 2.66 3.75
2 1.30 1.69 2.14 3.06 4.46 6.01
2-1/2 2.72 3.88 5.68 7.67
3 3.29 4.97 6.90 9.35
3-1/2 5.67 8.06 10.89
4 6.26 9.27 12.68 18.52
5 8.02 11.90 16.35 23.53
6 9.46 14.07 18.77 28.53
8 26.03 38.55

ASTM A554 Steel Tubing Pressure Rating

TUBE PRESSURE RATING FOR ASTM A554

OD inches Ave. Wall inches Min Yield Strength (PSI) Min Tensile Strength (PSI) Theoretical Burst Pressure * (PSI) Working Pressure (PSI) 25% of Burst Theoretical Yield Point ** (PSI) Collapse Pressure *** (PSI)
0.250 0.020 30,000 75,000 14,286 3,571 5,714 4,416
0.250 0.028 30,000 75,000 21,649 5,412 8,660 5,967
0.250 0.035 30,000 75,000 29,167 7,292 11,667 7,224
0.250 0.049 30,000 75,000 48,355 12,089 19,342 9,455
0.250 0.065 30,000 75,000 81,250 20,313 32,500 11,544
0.375 0.020 30,000 75,000 8,955 2,239 3,582 3,029
0.375 0.028 30,000 75,000 13,166 3,292 5,266 4,145
0.375 0.035 30,000 75,000 17,213 4,303 6,885 5,077
0.375 0.049 30,000 75,000 26,534 6,634 10,614 6,816
0.375 0.065 30,000 75,000 39,796 9,949 15,918 8,597
0.500 0.020 30,000 75,000 6,522 1,630 2,609 2,304
0.500 0.028 30,000 75,000 9,459 2,365 3,784 3,172
0.500 0.035 30,000 75,000 12,209 3,052 4,884 3,906
0.500 0.049 30,000 75,000 18,284 4,571 7,313 5,304
0.500 0.065 30,000 75,000 26,351 6,588 10,541 6,786
0.500 0.083 30,000 75,000 37,275 9,319 14,910 8,307
0.625 0.020 30,000 75,000 5,128 1,282 2,051 1,859
0.625 0.028 30,000 75,000 7,381 1,845 2,953 2,568
0.625 0.035 30,000 75,000 9,459 2,365 3,784 3,172
0.625 0.049 30,000 75,000 13,947 3,487 5,579 4,335
0.625 0.065 30,000 75,000 19,697 4,924 7,879 5,591
0.625 0.083 30,000 75,000 27,124 6,781 10,850 6,910
0.625 0.095 30,000 75,000 32,759 8,190 13,103 7,734
0.625 0.109 30,000 75,000 40,172 10,043 16,069 8,639
0.750 0.028 30,000 75,000 6,052 1,513 2,421 2,156
0.750 0.035 30,000 75,000 7,721 1,930 3,088 2,669
0.750 0.049 30,000 75,000 11,273 2,818 4,509 3,664
0.750 0.065 30,000 75,000 15,726 3,931 6,290 4,749
0.750 0.083 30,000 75,000 21,318 5,330 8,527 5,905
0.750 0.095 30,000 75,000 25,446 6,362 10,179 6,637
0.750 0.109 30,000 75,000 30,733 7,683 12,293 7,453
0.750 0.120 30,000 75,000 35,294 8,824 14,118 8,064
0.875 0.020 30,000 75,000 3,593 898 1,437 1,340
0.875 0.028 30,000 75,000 5,128 1,282 2,051 1,859
0.875 0.035 30,000 75,000 6,522 1,630 2,609 2,304
0.875 0.049 30,000 75,000 9,459 2,365 3,784 3,172
0.875 0.065 30,000 75,000 13,087 3,272 5,235 4,126
0.875 0.083 30,000 75,000 17,560 4,390 7,024 5,152
0.875 0.095 30,000 75,000 20,803 5,201 8,321 5,807
0.875 0.109 30,000 75,000 24,886 6,221 9,954 6,543
0.875 0.120 30,000 75,000 28,346 7,087 11,339 7,100
1.000 0.028 30,000 75,000 4,449 1,112 1,780 1,633
1.000 0.035 30,000 75,000 5,645 1,411 2,258 2,027
1.000 0.049 30,000 75,000 8,149 2,037 3,259 2,796
1.000 0.065 30,000 75,000 11,207 2,802 4,483 3,647
1.000 0.083 30,000 75,000 14,928 3,732 5,971 4,567
1.000 0.095 30,000 75,000 17,593 4,398 7,037 5,159
1.000 0.109 30,000 75,000 20,908 5,227 8,363 5,827
1.000 0.120 30,000 75,000 23,684 5,921 9,474 6,336
1.000 0.134 30,000 75,000 27,459 6,865 10,984 6,963
1.250 0.035 30,000 75,000 4,449 1,112 1,780 1,633
1.250 0.049 30,000 75,000 6,380 1,595 2,552 2,260
1.250 0.065 30,000 75,000 8,705 2,176 3,482 2,958
1.250 0.083 30,000 75,000 11,485 2,871 4,594 3,719
1.250 0.095 30,000 75,000 13,443 3,361 5,377 4,213
1.250 0.109 30,000 75,000 15,843 3,961 6,337 4,776
1.250 0.120 30,000 75,000 17,822 4,455 7,129 5,207
1.250 0.134 30,000 75,000 20,468 5,117 8,187 5,742
1.500 0.035 30,000 75,000 3,671 918 1,469 1,367
1.500 0.049 30,000 75,000 5,243 1,311 2,097 1,896
1.500 0.065 30,000 75,000 7,117 1,779 2,847 2,487
1.500 0.083 30,000 75,000 9,333 2,333 3,733 3,136
1.500 0.095 30,000 75,000 10,878 2,719 4,351 3,559
1.500 0.109 30,000 75,000 12,754 3,188 5,101 4,043
1.500 0.120 30,000 75,000 14,286 3,571 5,714 4,416
1.500 0.134 30,000 75,000 16,315 4,079 6,526 4,881
1.500 0.148 30,000 75,000 18,439 4,610 7,375 5,336
1.750 0.035 30,000 75,000 3,125 781 1,250 1,176
1.750 0.049 30,000 75,000 3,864 966 1,546 1,434
1.750 0.065 30,000 75,000 6,019 1,505 2,407 2,146
1.750 0.083 30,000 75,000 7,860 1,965 3,144 2,711
1.750 0.095 30,000 75,000 9,135 2,284 3,654 3,080
1.750 0.109 30,000 75,000 10,672 2,668 4,554 3,504
1.750 0.120 30,000 75,000 11,921 2,980 4,768 3,832
1.750 0.134 30,000 75,000 13,563 3,391 5,425 4,242
1.750 0.148 30,000 75,000 15,268 3,817 6,107 4,645
1.750 0.165 30,000 75,000 17,430 4,357 6,972 5,124
2.000 0.035 30,000 75,000 2,720 680 1,088 1,032
2.000 0.049 30,000 75,000 3,864 966 1,546 1,434
2.000 0.065 30,000 75,000 5,214 1,303 2,086 1,887
2.000 0.083 30,000 75,000 6,788 1,697 2,715 2,387
2.000 0.095 30,000 75,000 7,873 1,968 3,149 2,715
2.000 0.109 30,000 75,000 9,175 2,294 3,670 3,092
2.000 0.120 30,000 75,000 10,227 2,557 4,091 3,384
2.000 0.134 30,000 75,000 11,605 2,901 4,642 3,751
2.000 0.148 30,000 75,000 13,028 3,257 5,211 4,111
2.000 0.165 30,000 75,000 14,820 3,705 5,928 4,542

SA554 STainless Steel Tubing Tolerance

Tolerances — Diameter, Wall— Round Tubing
OD Size
Inches
Wall Thickness
OD
± Inches
ASTM A554 Stainless Steel Welded Round Tubing
Under 1/2
0.020 to 0.049
0.004
1/2 to 1
0.020 to0.065
0.005
1/2 to 1
over 0.065 to 0.134
0.010
Over 1 to 1-1/2
0.025 to 0.065
0.008
Over 1 to 1-1/2
over 0.065 to 0.134
0.010
Over 1-1/2 to 2
0.025 to 0.049
0.010
Over 1-1/2 to 2
over 0.049 to 0.083
0.011
Over 1-1/2 to 2
over 0.083 to 0.149
0.012
Over 2 to 2-1/2
0.032 to 0.065
0.012
Over 2 to 2-1/2
over 0.065 to 0.109
0.013
Over 2 to 2-1/2
over 0.109 to 0.165
0.014
Over 2-1/2 to 3-1/2
0.032 to 0.165
0.014
Over 2-1/2 to 3-1/2
over 0.165
0.020
Over 3-1/2 to 5
0.035 to 0.165
0.020
Over 3-1/2 to 5
over 0.165
0.025
Over 5 to 7-1/2
0.049 to 0.250
0.025
Over 5 to 7-1/2
over 0.250
0.030
Over 7-1/2 to 16
all
0.00125 In/In of Circumference

ASTM A554 TOLERANCES — OUTSIDE DIAMETER SQUARE AND RECTANGULAR TUBING

Largest Specified
Outside Dimension,
Inches
Wall Thickness,
Inches
OD
± Inches
ASME SA 554 Tubing
To 1-1/4
all
0.015
ASME SA 554 Tubing
Over 1-1/4 to 2
all
0.020
ASME SA 554 Tubing
Over 2-1/2 to 5
all
0.030
ASME SA 554 Tubing
Over 5-1/2
all
0.060

MAXIMUM RADII OF CORNERS

Wall Thickness, Inches
Radii of Corners,
max., in.
ASTM A554 Tubing
Over 0.020 to 0.049, incl
3/32
ASME SA554 Tubing
Over 0.049 to 0.065, incl
1/8
ASME SA554 Tubing
Over 0.065 to 0.083, incl
9.64
ASME SA554 Tubing
Over 0.083 to 0.095, incl
3/16
ASME SA554 Tubing
Over 0.095 to 0.109, incl
13/34
ASME SA554 Tubing
Over 0.109 to 0.134, incl
7/32
ASTM A554 Tubing
Over 0.134 to 0.156, incl
1/4
ASTM A554 Tubing
Over 0.156 to 0.200, incl
3/8
ASTM A554 Tubing
Over 0.200 to 0.250, incl
1/2
ASME SA554 Tubing
Over 0.250 to 0.375, incl
3/4

Note:For rectangular or square structural tubing with heavier walls, the radius of any outside corner of the section shall not exceed three times the specified wall thickness.


ASTM A554 TWIST TOLERANCES

Largest Size, Inches
Twist In 3 ft., max, Inches
ASME SA554 Tubing
Under 1/2
0.050
ASME SA554 Tubing
1/2 to 1-1/2 , incl.
0.075
ASTM A554 Tubing
Over 1-1/2 to 2-1/2, incl.
0.095
ASTM A554 Tubing
Over 2-1/2 to 4, incl.
0.125
ASTM A554 Tubing
Over 4 to 6, incl.
0.250
ASME SA 554 Tubing
Over 6
0.375

ASME A554 Steel Tubing Price List

  • astm a554 Square steel tubing
    FOB Price: US $1400-$4000 / ton
  • stainless steel tubing sch80 ASTM A554
    FOB Price: US $2.50-30.0 / kilogram
  • high quality welded stainless astm a554 polished steel tube
    FOB Price: US $3.50-$4.28 / Kilogram
  • Factory directly sale ASTM A554 stainless steel welded tubing
    FOB Price: US $1000-3000 / ton
  • ASTM A554 Stainless steel mechanical tubing
    FOB Price: US $3.00-$5.00 / kilogram
  • ASTM A554 / L / TP316L Welded Stainless Steel Mechanical Tubing
    FOB Price: US $2.50-$5.00 / Kilogram
  • ASTM A554 Welded Steel Mechanical Tubing
    FOB Price: US $1.50-$4.00 / Kilogram
  • astm a554 welded stainless steel mechanical tube
    FOB Price: US $2.3-8 / Kilogram
  • ASTM 554 MT414 MT429 MT403 MT410MT430 MT443 Welded Stainless Steel Pipe/Tube
    US $1000.00-$2000.00 / Ton
  • ASTM A554 ornamental steel tubing manufacturer
    US $700.00-$3000.00 / Ton
  • Superior Quality A554 304 Welded Stainless Steel Tube
    US $2.00-$4.50 / Piece
  • astm a554 304l stainless steel tubing
    US $1100.00-$3000.00 / Ton
  • stainless steel rectangular tubing ASTM A554
    US $30.00-$60.00 / Kilogram
  • ASTM A554 Steel Pipe/ ASTM A554M Standard Steel Tube for Mechanical Use
    US $600.00-$1000.00 / Ton
  • stainless steel 316l rolled welded tube a554 304 welded stainless steel tubing
    US $1000.00-$4000.00 / Metric Ton
  • ASTM A554 high quality, welded aisi 304L SS tube
    US $1300.00-$3600.00 / Ton
  • A554 TP202 /304/TP316 bright annealed stainless steel tubing
    US $1000.00-$4000.00 / Metric Ton
  • ASTM A554 301S Stainless Steel Welded Tube for Mechanical
    US $3000.00-$3400.00 / Metric Ton
  • astm a554 welded stainless steel tubing 304 sch10
    US $2.50-$6.00 / Kilogram
  • A554 304 Welded Stainless Steel tubing
    US $1000.00-$5000.00 / Metric Ton
  • ASTM A554 Stainless Steel Ornamental Tube
    US $1000.00-$2300.00 / Metric Ton

Tycoon Piping is a ISO approved certified TP316L Welded Tube exporter in India. We are known as a trusted vendor as a ASTM A554 Stainless Steel Pipe distributor & dealer in your country. Our A554 TP304 Seamless Tube Pipe are tested to international standards, and specifications as per DIN, JIS, EN, ASTM etc. We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery.

We offer wide range of A554 TP304 Seamless Tube, Tubo ASTM a554 & ASTM A554 Stainless Steel Pipe at factory price.
Tycoon piping provide you with robust quality of TP316L Welded Tube & ASTM A554 Aisi 304 Tubing in a wide range