Schedule 80 Pipe Pressure Rating

Check Pressure Rating chart for Sch 80 Carbon Steel Seamless Pipes

Schedule 80 Seamless Steel Pipe

Schedule 80 Seamless Steel Pipe

Schedule 80 CS Welded Pipe

Schedule 80 CS Welded Pipe

SCH 80 Carbon Steel ERW Pipe

SCH 80 Carbon Steel ERW Pipe

For the most part, Sch 80 Seamless Pipe Pressure Rating, connectors and segments are evaluated for weights equivalent to the greatest permissible working weights of the tubing, hose or pipe. Weight appraisals for fittings with both cylinder fitting and pipe string closes are controlled by the end association with the lower weight rating. Female and male pipe strings to have a similar weight rating in a similar ostensible pipe estimate. Anyway to accomplish a similar weight rating as the male pipe end, female closures require a heavier divider than down to earth. Note that numerous extraordinarily structured fittings, drilled through fittings and fittings having AN, O-Seal and SAE/MS vital closures may have lower weight appraisals than that of the tubing. For progressively exact weight appraisals for a particular fitting, contact SSP client administration.

Schedule 80 Pipe Nipple Pressure Rating has thicker dividers and can with stand higher PSI (pounds per square inch). This makes it perfect for mechanical and synthetic applications. To give you a thought of the size contrast, 1" plan 40 PVC pipe has a .133" least divider and 450 PSI, while plan 80 has a .179" least divider and 630 PSI.

All PVC 2 Sch 80 Seamless Pipe will be produced from a Type I, Grade I Polyvinyl Chloride (PVC) compound with a Cell Classification of 12454 for every ASTM D1784. Every single compound segment will be recorded with NSF® and meet the necessities of NSF/ANSI Standard 61-G as reasonable for Potable Water and is viewed as Lead Free. The pipe will be fabricated in strict consistence to ASTM D1785, reliably meeting the Quality Assurance test necessities of this standard with respect to material, workmanship, burst weight, straightening, and expulsion quality. Any pSchedule 80 304 Stainless Steel Pipe Pressure Rating will meet the necessities of ASTM D2672. This pipe should likewise meet the necessities of NSF Standard 14 and will bear the NSF mark.

Nominal Pipe size [inches] Outside diameter- OD [inches] Outside diameter- OD [mm] Wall thickness [inches] Wall thickness [mm] Weight [lb/ft] Weight [kg/m]
1/8" DN8 0.41 10.3 0.095 2.41 0.31 0.47
1/4" DN12 0.54 13.7 0.119 3.02 0.54 0.8
3/8" DN10 0.68 17.1 0.126 3.2 0.74 1.1
1/2" DN15 0.84 21.3 0.147 3.73 1.09 1.62
3/4" DN20 1.05 26.7 0.154 3.91 1.47 2.2
1" DN25 1.32 33.4 0.179 4.55 2.17 3.24
1 1/4" DN32 1.66 42.2 0.191 4.85 3.0 4.47
1 1/2" DN40 1.9 48.3 0.2 5.08 3.63 5.41
2" DN50 2.375 60.3 0.218 5.54 5.02 7.48
2 1/2" DN65 2.875 73.0 0.276 7.01 7.66 11.41
3" DN80 3.5 88.9 0.3 7.62 10.25 15.27
3 1/2" 4.0 101.6 0.318 8.08 12.5 18.63
4" DN100 4.5 114.3 0.337 8.56 14.98 22.32
5" DN125 5.563 141.3 0.375 9.53 20.78 30.97
6" DN150 6.625 168.3 0.432 10.97 28.57 42.56
8" DN200 8.625 219.1 0.5 12.7 43.39 64.64
10" DN250 10.75 273.0 0.594 15.09 64.43 96.01
12" DN300 12.75 323.8 0.688 17.48 88.63 132.08
14" DN350 14.0 355.6 0.75 19.05 106.13 158.1
16" DN400 16.0 406.4 0.844 21.44 136.61 203.53
18" DN450 18.0 457.0 0.938 23.83 170.92 254.55
20" DN500 20.0 508.0 1031.0 26.19 208.87 311.17
24" DN600 24.0 610.0 1125.0 30.96 296.58 442.08

SCH 80 Steel Pipe Pressure Rating (psig)
Pipe Size
(inches)
Pipe Schedule Temperature (oF)
100 200 300 400 500 600 650 700 750
1" 40 3048 2629 2362 2171 2019 1924 1867 1824 1810
80 4213 3634 3265 3002 2791 2659 2580 2528 2501
160 6140 5296 4759 4375 4068 3876 3761 3684 3646
1 1/2" 40 2257 1947 1750 1608 1496 1425 1383 1354 1340
80 3182 2744 2466 2267 2108 2009 1949 1909 1889
160 4619 3984 3580 3291 3060 2916 2829 2772 2743
2" 40 1902 1640 1474 1355 1260 1201 1165 1141 1129
80 2747 2369 2129 1957 1820 1734 1682 1648 1631
160 4499 3880 3486 3205 2980 2840 2755 2699 2671
3" 40 1806 1558 1400 1287 1196 1140 1106 1084 1072
80 2553 2202 1979 1819 1691 1612 1564 1532 1516
160 3840 3312 2976 2736 2544 2424 2352 2304 2280
4" 40 1531 1321 1187 1091 1014 967 938 919 909
80 2213 1909 1715 1577 1466 1397 1355 1328 1314
160 3601 3106 2791 2566 2386 2273 2206 2161 2138
5" 40 1342 1158 1040 956 889 847 822 805 797
80 1981 1709 1535 1411 1312 1250 1213 1189 1176
160 3414 2945 2646 2433 2262 2155 2091 2049 2027
6" 40 1219 1052 945 869 808 770 747 732 724
80 1913 1650 1483 1363 1267 1208 1172 1148 1136
160 3289 2836 2549 2343 2179 2076 2014 1973 1953
8" 40 1073 926 832 765 711 678 657 644 637
80 1692 1459 1311 1205 1121 1068 1036 1015 1005
160 3175 2738 2460 2262 2103 2004 1944 1905 1885
10" 40 974 840 755 694 645 615 596 584 578
80 1609 1388 1247 1147 1066 1016 986 966 956
160 3147 2714 2439 2242 2085 1986 1927 1880 1868
  • 1 psi (lb/in2) =  6,894.8 Pa (N/m2) = 6.895x10-2 bar

SCH 80 Bare & Black Extra Strong Steel Pipe

  • Tycoon Piping is a stocking distributor of Carbon Steel Pipes in all standard and custom sizes & wall thickness.
  • We also offer value added services like: Punching, Bending, Shearing, Hot Dipped Galvanizing, Blanchard Grinding, Coating & Flame Cutting.
  • Contact Tycoon Piping with your requirements, we can supply globally like Singapore, Malaysia, Thailand, Australia & Netherlands.