Check the ISO 3183 Vs Api 5l Pipe
ISO 3183 Api 5l, ISO 3183 Wall Thickness and Sizes of Pipes
Seamless Pipe
Welded Pipe
ERW Pipe
ISO 3183:2012 determines necessities for the assembling of two item detail levels (PSL 1 and PSL 2) of consistent and welded steel funnels for use in pipeline transportation frameworks in the oil and gaseous petrol ventures. We supply and stock a full scope of ISO 3183 GR.L450 Welded Pipe. All items we supply are adjusting to industry-norms or surpassing API, ASTM, ASME, ANSI and other national and global principles.ISO 3183 GR.L450 Welded Pipe are separately secured with the goal that the superior nature of material is held and there are no harms in the last phases of generation.
ISO 3183 Vs Api 5l accompanies engraves significant to the activity data (for instance heat number, size, material and part number). This data is additionally printed along all to whom ISO 3183 GR.L450 Welded Pipe is conveyed. Your requirement for ISO 3183 GR.L450 Welded Pipe of standard length and distance across channels and tubing closes here. On the off chance that you need high quality, high elastic, overwhelming divider line pipe prerequisites for profound sharp wells, boring, seaward penetrating and generation, cold investigation and creation, or you need ISO 3183 GR.L450 Welded Pipe for gaseous petrol, oil or water transport, at that point Trio Steel can satisfy the needs of your organization.
The American Petroleum Institute detail ISO 3183 Pipe is for the most part utilized for the transportation of flammable gas and oil. These ISO 3183 Pipe are both consistent and welded. Their primary object is the transportation of water, oil and gas starting with one area then onto the next. The capacity of the producer finds out the extent of the pipe.
An ISO 3183 Pipe is fabricated by sticking to the determinations set somewhere around the International Organization for Standardization (ISO) 3183. It institutionalizes the criteria for the materials, gear and seaward structures for petrochemical, oil and flammable gas businesses. Iso 3183 Wall Thickness, Iso 3183 Pipe, Iso 3183 Pipe PSL1 and Iso 3183 Pipe Size PSL2 are the two Product Specification Levels that have been perceived by the specialized board of trustees. PSL 1 incorporates channels that are made of a standard quality while PSL 2 funnels have extra compound and mechanical properties and their testing necessities additionally vary.
ISO 3183 SEAMLESS LINE PIPE range
ISO 3183 Seamless Pipe Specification |
ISO 3183 |
ISO 3183 Seamless Pipe Grades |
ISO 3183 Grade L245 PSL1, ISO 3183 Grade L245 PSL2, ISO 3183 Grade L290 PSL1, ISO 3183 Grade L290 PSL2, ISO 3183 Grade L320 PSL1, ISO 3183 Grade L320 PSL2, ISO 3183 Grade L360 PSL1, ISO 3183 Grade L360 PSL2, ISO 3183 Grade L390 PSL1, ISO 3183 Grade L390 PSL2, ISO 3183 Grade L415 PSL1, ISO 3183 Grade L415 PSL2, ISO 3183 Grade L450 PSL1, ISO 3183 Grade L450 PSL2, ISO 3183 Grade L485 PSL1, ISO 3183 Grade L485 PSL2 |
ISO 3183 Seamless Pipe Type |
Seamless |
ISO 3183 Seamless Pipe Outer Diameter Size |
3/8" NB To 30" NB (Nominal Bore Size) |
ISO 3183 Seamless Pipe Wall Thickness |
Schedule 20 To Schedule XXS (Heavier On Request) Up to 250 mm Thickness |
ISO 3183 Seamless Pipe Length |
5 To 7 Meters, 09 To 13 Meters, Single Random Length, Double Random Length And Customize Size. |
ISO 3183 Seamless Pipe Ends |
Plain Ends / Beveled Ends / Coupling |
ISO 3183 Seamless Pipe Delivery Conditions |
As Rolled, Normalizing Rolled, Hot Forming, Cold Finishing Thermomechanical Rolled / Formed, Normalizing Formed, Normalized and Tempered / Quenched and Tempered - BR / N / Q /T |
ISO 3183 Seamless Pipe Coating |
Epoxy Coating / Colour Paint Coating / 3LPE Coating. |
ISO 3183 Seamless Pipe Other Testing |
NACE MR0175, NACE TM0177, SOUR SERVICE, NACE TM0284, PWHT, HIC TEST, SSC TEST, SWC, H2 SERVICE, IBR, IPS-M-PI190, IPS-M-PI-221 APPENDIX G Etc. |
ISO 3183 Seamless Pipe Dimension |
All Pipes Is suppliers and Inspected / Tested to the Relevant standards including ASTM, ASME, API. |
ISO 3183 Seamless Pipe Value Added Services |
Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Galavanizing / Heat Treatment |
ISO 3183 Seamless Pipe Packaging |
Loose / Bundle / Wooden Pallet / Wooden Box / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
ISO 3183 Seamless Pipe Shipment & Transportation |
By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet |
ISO 3183 Seamless Pipe Material Test Certificate |
suppliers Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab./ Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
iSO 3183 PSL1 SEAMLESS PIPES CHEMICAL COMPOSITIONS with t u 25,0 mm (0.984 in)
| Steel grade (Steel name) |
Mass fraction, based upon heat and product analyses a % | |||||||
| C | Mn | P | S | V | Nb | Ti | ||
| max. b | max. b | min. | max. | max. | max. | max. | max. | |
| Seamless Pipe | ||||||||
| L175 or A25 | 0,21 | 0,60 | - | 0,03 | 0,03 | - | ||
| L175P or A25P | 0,21 | 0,60 | 0,045 | 0,08 | 0,03 | - | ||
| L210 or A | 0,22 | 0,90 | - | 0,03 | 0,03 | |||
| L245 or B | 0,28 | 1,20 | - | 0,03 | 0,03 | c,d | c,d | d |
| L290 or X42 | 0,28 | 1,30 | - | 0,03 | 0,03 | d | d | d |
| L320 or X46 | 0,28 | 1,40 | - | 0,03 | 0,03 | d | d | d |
| L360 or X52 | 0,28 | 1,40 | - | 0,03 | 0,03 | d | d | d |
| L390 or X56 | 0,28 | 1,40 | - | 0,03 | 0,03 | d | d | d |
| L415 or X60 | 0,28 e | 1,40 e | - | 0,03 | 0,03 | f | f | f |
| L450 or X65 | 0,28 e | 1,40 e | - | 0,03 | 0,03 | f | f | f |
| L485 or X70 | 0,28 e | 1,40 e | - | 0,03 | 0,03 | f | f | f |
| Welded Pipe | ||||||||
| L175 or A25 | 0,21 | 0,60 | - | 0,03 | 0,03 | - | ||
| L175P or A25P | 0,21 | 0,60 | 0,045 | 0,08 | 0,03 | - | ||
| L210 or A | 0,22 | 0,90 | - | 0,03 | 0,03 | |||
| L245 or B | 0,26 | 1,20 | - | 0,03 | 0,03 | c,d | c,d | d |
| L290 or X42 | 0,26 | 1,30 | - | 0,03 | 0,03 | d | d | d |
| L320 or X46 | 0,26 | 1,40 | - | 0,03 | 0,03 | d | d | d |
| L360 or X52 | 0,26 | 1,40 | - | 0,03 | 0,03 | d | d | d |
| L390 or X56 | 0,26 | 1,40 | - | 0,03 | 0,03 | d | d | d |
| L415 or X60 | 0,26 e | 1,40 e | - | 0,03 | 0,03 | f | f | f |
| L450 or X65 | 0,26 e | 1,45 e | - | 0,03 | 0,03 | f | f | f |
| L485 or X70 | 0,26 e | 1,65 e | - | 0,03 | 0,03 | f | f | f |
| a 0,50 % maximum for copper; 0,50 % maximum for nickel; 0,50 % maximum for chromium; and 0,15 % maximum for molybdenum,For grades up to and including L360/X52, Cu, Cr and Ni shall not be added intentionally. |
||||||||
| b For each reduction of 0,01 % below the specified maximum concentration for carbon, an increase of 0,05 % above the specified maximum concentration for manganese is permissible, up to a maximum of 1,65 % for grades W L245 or B, but u L360 or X52; up to a maximum of 1,75 % for grades > L360 or X52, but < L485 or X70; and up to a maximum of 2,00 % for grade L485 or X70, |
||||||||
| c Unless otherwise agreed, the sum of the niobium and vanadium contents shall be u 0,06 %, | ||||||||
| d The sum of the niobium, vanadium and titanium concentrations shall be u 0,15 %, | ||||||||
| e Unless otherwise agreed. | ||||||||
| f Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be u 0,15 %. | ||||||||
ISO 3183 PSL2 SEAMLESS PIPE CHEMICAL COMPOSITIONS with t u 25,0 mm (0.984 in)
| Steel grade (Steel name) |
Mass fraction, based upon heat and product analyses a % | Carbon equivalent a % maximum | |||||||||
| C | Si | Mn | P | S | V | Nb | Ti | Other | CE iiw | CE pcm | |
| Seamless Pipe | |||||||||||
| L245R or BR | 0,24 | 0,4 | 1,2 | 0,025 | 0,015 | c | c | 0,04 | e | 0,43 | 0,25 |
| L290R or X42 R | 0,24 | 0,4 | 1,2 | 0,025 | 0,015 | 0,06 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L245N or BN | 0,24 | 0,4 | 1,2 | 0,025 | 0,015 | c | c | 0,04 | e | 0,43 | 0,25 |
| L290N or X42N | 0,24 | 0,4 | 1,2 | 0,025 | 0,015 | 0,06 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L320N or X46N | 0,24 | 0,4 | 1,2 | 0,025 | 0,015 | 0,07 | 0,05 | 0,04 | d,e | 0,43 | 0,25 |
| L360N or X52N | 0,24 | 0,45 | 1,4 | 0,025 | 0,015 | 0,1 | 0 | 0,04 | d,e | 0,43 | 0,25 |
| L390N or X56N | 0,24 | 0,45 | 1,4 | 0,025 | 0,015 | 0,10 f | 50,05 | 0,04 | d,e | 0,43 | 0,25 |
| L415N or X60N | 0,24 f | 0,45 f | 0,45 f | 0,025 | 0,015 | 0,10 f | 0,05 f | 0,04 f | g,h | as agreed | |
| L245Q or BQ | 0,18 | 0,45 | 1,4 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L290Q or X42Q | 0,18 | 0,45 | 1,4 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L320Q or X46Q | 0,18 | 0,45 | 1,4 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L360Q or X52Q | 0,18 | 0,45 | 1,5 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L390Q or X56Q | 0,18 | 0,45 | 1,5 | 0,025 | 0,015 | 0,07 | 0,05 | 0,04 | d,e | 0,43 | 0,25 |
| L415Q or X60Q | 0,18 f | 0,45 f | 1,70 f | 0,025 | 0,015 | g | g | g | h | 0,43 | 0,25 |
| L450Q or X65Q | 0,18 f | 0,45 f | 1,70 f | 0,025 | 0,015 | g | g | g | h | 0,43 | 0,25 |
| L485Q or X70Q | 0,18 f | 0,45 f | 1,80 f | 0,025 | 0,015 | g | g | g | h | 0,43 | 0,25 |
| L555Q or X80Q | 0,18 f | 0,45 f | 1,90 f | 0,025 | 0,015 | g | g | g | I,j | as agreed | |
| Welded Pipe | |||||||||||
| L245M or BM | 0,22 | 0,45 | 1,2 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L290M or X42M | 0,22 | 0,45 | 1,3 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L320M or X46M | 0,22 | 0,45 | 1,3 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L360M or X52M | 0,22 | 0,45 | 1,4 | 0,025 | 0,015 | d | d | d | e | 0,43 | 0,25 |
| L390M or X56M | 0,22 | 0,45 | 1,4 | 0,025 | 0,015 | d | d | d | e | 0,43 | 0,25 |
| L415M or X60M | 0,12 f | 0,45 f | 1,60 f | 0,025 | 0,015 | g | g | g | h | 0,43 | 0,25 |
| L450M or X65M | 0,12 f | 0,45 f | 1,60 f | 0,025 | 0,015 | g | g | g | h | 0,43 | 0,25 |
| L485M or X70M | 0,12 f | 0,45 f | 1,70 f | 0,025 | 0,015 | g | g | g | h | 0,43 | 0,25 |
| L555M or X80M | 0,12 f | 0,45 f | 1,85 f | 0,025 | 0,015 | g | g | g | i | 0,43 f | 0,25 |
| L625M or X90M | 0,1 | 0,55 f | 2,10 f | 0,02 | 0,015 | g | g | g | i | - | 0,25 |
| L690M or X100M | 0,1 | 0,55 f | 2,10 f | 0,02 | 0,015 | g | g | g | I,j | 0,25 | |
| L830M or 120X | 0,1 | 0,55 f | 2,10 f | 0,02 | 0,015 | g | g | g | I,j | 0,25 | |
| a Based upon product analysis. For seamless pipe with t > 20,0 mm (0.787 in), the carbon equivalent limits shall be as agreed. The CEIIW limits apply if the carbon mass fraction is greater than 0,12 % and the CEPcm limits apply if the carbon mass fraction is less than or equal to 0,12 %. |
|||||||||||
| b For each reduction of 0,01 % below the specified maximum for carbon, an increase of 0,05 % above the specified maximum for manganese is permissible, up to a maximum of 1,65 % for grades W L245 or B, but u L360 or X52; up to a maximum of 1,75 % for grades > L360 or X52, but < L485 or X70; up to a maximum of 2,00 % for grades W L485 or X70, but u L555 or X80; and up to a maximum of 2,20 % for grades > L555 or X80. |
|||||||||||
| c Unless otherwise agreed, the sum of the niobium and vanadium concentrations shall be u 0,06 %. | |||||||||||
| d The sum of the niobium, vanadium and titanium concentrations shall be u 0,15 %. | |||||||||||
| e Unless otherwise agreed, 0,50 % maximum for copper, 0,30 % maximum for nickel, 0,30 % maximum for chromium and 0,15 % maximum for molybdenum. |
|||||||||||
| f Unless otherwise agreed. | |||||||||||
| g Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be u 0,15 %. | |||||||||||
| Unless otherwise agreed, 0,50 % maximum for copper, 0,50 % maximum for nickel, 0,50 % maximum for chromium and 0,50 % maximum for molybdenum. |
|||||||||||
| i Unless otherwise agreed, 0,50 % maximum for copper, 1,00 % maximum for nickel, 0,50 % maximum for chromium and 0,50 % maximum for molybdenum. |
|||||||||||
| j 0,004 % maximum for boron. | |||||||||||
iso 3183 psl1 seamless pipes tensile properties
| Pipe Grade | Pipe Body of Seamless and Welded Pipes | Weld seam of EW, SAW and COW pipes | ||
| Yeild strength a | Tensile strength a | Elongation | Tensile strength b | |
| Rt0.5 | Rm | Af | Rm | |
| Mpa (psi) | Mpa (psi) | % | Mpa (psi) | |
| minimum | minimum | minimum | minimum | |
| L175 or A25 | 175 (25 400) | 310 (45 000) | c | 310 (45 000) |
| L175P or A25P | 175 (25 400) | 310 (45 000) | c | 310 (45 000) |
| L210 or A | 210 (30 500) | 335 (48 600) | c | 335 (48 600) |
| L245 or BR L245 or B |
245 (35 500) | 415 (60 200) | c | 415 (60 200) |
| L290R or x42R L290 or x42 |
290 (42 100) | 415 (60 200) | c | 415 (60 200) |
| L320 or X46 | 320 (46 400) | 435 (63 100) | c | 435 (63 100) |
| L360 or X52 | 360 (52 200) | 460 (66 700) | c | 460 (66 700) |
| L390 or X56 | 390 (56 600) | 490 (79 100) | c | 490 (71 100) |
| L415 or X60 | 415 (60 200) | 520 (75 400) | c | 520 (75 400) |
| L450 or X65 | 450 (65 300) | 535 (77 600) | c | 535 (77 600) |
| L485 or X70 | 485 (70 300) | 570 (82 700) | c | 570 (82 700) |
ISO 3183 PSL2 SEAMLESS PIPE TENSILE PROPERTIES
| Pipe grade | Pipe Body of Seamless and Welded Pipes | weld seam of HFW, SAW and COW pipes | |||||
| Yield Strength a | Tensile Strength a | Ratio a,b,c | Elongation Af | Tensile strength d | |||
| Rt0.5 b | Rm | Rt0,5lRm | Rm | ||||
| Mpa (psi) | Mpa (psi) | % | Mpa (psi) | ||||
| minimum | maximum | minimum | maximum | maximum | minimum | minimum | |
| L245R or BR L245N or BN L245Q or BQ L245M or BM |
245 (35 500) |
450 e (65 300) e |
415 (60 200) |
760 (110 200) |
0,93 | f | 415 (60 200) |
| L290R or X42R L290N or X42N L290Q or X42Q L290M or X42M |
290 (42 100) |
495 (71 800) |
415 (60 200) |
760 (110 200) |
0,93 | f | 415 (60 200) |
| L320N or X46N L320Q or X46Q L320M or X46M |
320 (46 400) |
525 (76 100) |
435 (63 100) |
760 (110 200) |
0,93 | f | 435 (63 100) |
| L360N or X52N L360Q or X52Q L360M or X52M |
360 (52 200) |
530 (76 900) |
460 (66 700) |
760 (110 200) |
0,93 | f | 460 (66 700) |
| L390N or X56N L390Q or X56Q L390M or X56M |
390 (56 600) |
545 (79 000) |
490 (71 100) |
760 (110 200) |
0,93 | f | 490 (71 100) |
| L415N or X60N L415Q or X60Q L415M or X60M |
415 (60 200) |
565 ( 81 900) |
520 (75 400) |
760 (110 200) |
0,93 | f | 520 (75 400) |
| L450Q or X65Q L450M or X65M |
450 (65 300) |
600 (87 000) |
535 (77 600) |
760 (110 200) |
0,93 | f | 535 (77 600) |
| L485Q or X70Q L485M or X70M |
485 (70 300) |
635 (92 100) |
570 (82 700) |
760 (110 200) |
0,93 | f | 570 (82 700) |