API 5CT P110 Casing

Api 5ct P110 Casing Tube

Material P110 Steel Pipe Suppliers In India, Seamless 5ct P110 Petroleum Casing Pipe

API 5CT Seamless Tube

API 5CT Seamless Tube

Welded 5CT K55 Tubing

Welded 5CT K55 Tubing

Stainless Steel K55 Tube

Stainless Steel K55 Tube

Oil Casing And Seamless Pipe, Seamless 5ct Petroleum Casing Pipe, Petroleum Casing Pipe, Petroleum Tubing, Oil Casing Pipe, Casing and Tubing, API 5CT P110 Petroleum Casing Pipe, Smls Steel Pipes And Casing Tubing, API 5ct Oil Casing Pipe, API 5ct Oilfield Tubing, Grade P110 Oil Well Drilling Tube. Our oilfield tubing and P110 Api Steel Casing Pipe can be broadly pertinent to oil, development, shipbuilding, purifying, flight, electric power, nourishment, paper, compound industry, restorative gear, boilers, heat exchangers, metallurgy, etc.

Packaging And Tubing, Tubing And Casing, OCTG Steel Pipe, Petroleum Steel Pipe, Seamless Casing, P110 Casing, Oil And Gas Casing, OCTG Casing, 4 1 2 Casing, P110 Tubing, P110 Material, NSSMC ERW Casing, Casing Pipe, Oil Casing Pipe, Well Casing Pipe, Steel Casing Pipe, Seamless Casing Pipe, Casing Pipe supplierss, Steel Pipe Casing, Casing Pipe Company, Oil Tube For Petroleum And Natural Gas Industries, Steel Pipe For Oil Well, Pipeline To Transport Fluid, Fluid Conveying Pipe And Casing, Containment Pipe, Well Casing Protection

Programming interface 5CT P110 Casing Tubing is an API 5CT Oil Casing Pipe and predominantly utilized for oil well boring. We produce API 5CT P110 Casing Tubing as per the SY/T6194-96 standard, it is accessible as short string sort and long string sort provided with their couplings. As indicated by American Petroleum Institute Standard API SPEC 5CT1988 first release, the steel evaluation of API 5CT oil packaging channel can be separated into ten sorts, including H-40, J-55, K-55, N-80, C-75, L-80, C-90, C-95, P-110 and Q-125. We supply the packaging funnel and Grade P110 Oil Well Drilling Casing Pipe went with string and coupling.

Table of content

API 5CT P110 Casing Tubing Tensile & Hardness Requirement

Group Grade Type Total elongation under load % Yield strength MPa Tensile strength min. MPa Hardness a max. Specified wall thickness mm Allowable hardness variation b HRC
min. max .   HRC HBW
1 2 3 4 5 6 7 8 9 10 11
1 H40 - 0.5 276 552 414 - - - -
J55 - 0.5 379 552 517 - - - -
K55 - 0.5 379 552 655 - - - -
N80 1 0.5 552 758 689 - - - -
N80 Q 0.5 552 758 689 - - - -
R95 - 0.5 655 758 724 - - - -
2 M65 - 0.5 448 586 586 22 235 - -
L80 1 0.5 552 655 655 23 241 - -
L80 9Cr 0.5 552 655 655 23 241 - -
L80 13Cr 0.5 552 655 655 23 241 - -
C90 1 0.5 621 724 689 25.4 255 ≤ 12.70 12.71 to 19.04 19.05 to 25.39 ≥ 25.40 3.0 4.0 5.0 6.0
T95 1 0.5 655 758 724 25.4 255 ≤ 12.70 12.71 to 19.04 19.05 to 25.39 ≥ 25.40 3.0 4.0 5.0 6.0
C110 - 0.7 758 828 793 30 286 ≤ 12.70 12.71 to 19.04 19.05 to 25.39. ≥ 25.40 3.0 4.0 5.0 6.0
3 P110 - 0.6 758 965 862 - - - -
4 Q125 1 0.65 862 1034 931 b - ≤ 12.70 12.71 to 19.04 ≥ 19.05 3.0 4.0 5.0
a In case of dispute, laboratory Rockwell C hardness testing shall be used as the referee method.
b No hardness limits are specified, but the maximum variation is restricted in accordance with 7.8 and 7.9 of API Spec. 5CT.

API 5CT Gr. P110 Tubing Chemical Composition

Group Grade Type C Mn Mo Cr Ni max. Cu max. P max. S max. Si max.
min. max. min. max. min. max. min. max.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 H40 - - - - - - - - - - - 0.03 0.03 -
J55 - - - - - - - - - - - 0.03 0.03 -
K55 - - - - - - - - - - - 0.03 0.03 -
N80 1 - - - - - - - - - - 0.03 0.03 -
N80 Q - - - - - - - - - - 0.03 0.03 -
R95 - - 0.45 c - 1.9 - - - - - - 0.03 0.03 0.45
2 M65 - - - - - - - - - - - 0.03 0.03 -
  L80 1 - 0.43 a - 1.9 - - - - 0.25 0.35 0.03 0.03 0.45
  L80 9Cr - 0.15 0.3 0.6 0.9 1.1 8 10 0.5 0.25 0.02 0.01 1
  L80 13Cr 0.15 0.22 0.25 1 - - 12 14 0.5 0.25 0.02 0.01 1
  C90 1 - 0.35 - 1.2 0.25 b 0.85 - 1.5 0.99 - 0.02 0.01 -
  T95 1 - 0.35 - 1.2 0.25 d 0.85 0.4 1.5 0.99 - 0.02 0.01 -
  C110 - - 0.35 - 1.2 0.25 1 0.4 1.5 0.99 - 0.02 0.005 -
3 P110 e - - - - - - - - - - 0.030 e 0.030 e -
4 Q125 1 - 0.35 1.35 - 0.85 - 1.5 0.99 - 0.02 0.01 -
a The carbon content for L80 may be increased up to 0.50 % maximum if the product is oil-quenched.
b The molybdenum content for Grade C90 Type 1 has no minimum tolerance if the wall thickness is less than 17.78 mm.
c The carbon content for R95 may be increased up to 0.55 % maximum if the product is oil-quenched.
d The molybdenum content for T95 Type 1 may be decreased to 0.15 % minimum if the wall thickness is less than 17.78 mm.
e For EW Grade P110, the phosphorus content shall be 0.020 % maximum and the sulfur content 0.010 % maximum.
NL = no limit. Elements shown shall be reported in product analysis.

P110 Casing Tubing Dimensions

Pipe Casing Sizes, Oilfield Casing Sizes & Casing Drift Sizes
Outer Diameter (Casing Pipe Sizes) 4 1/2"-20", (114.3-508mm)
Standard Casing Sizes 4 1/2"-20", (114.3-508mm)
Thread Type Buttress thread casing, Long round thread casing, Short round thread casing
Function It can protect the tubing pipe.

Oil Tube For Petroleum And Natural Gas Industries

Name of Pipes Specification Steel Grade Standard
D (S) (L)
(mm) (mm) (m)
Petroleum Casing Pipe 127-508 5.21-16.66 6-12 J55. M55. K55.
L80. N80. P110.
API Spec 5CT (8)
Petroleum Tubing 26.7-114.3 2.87-16.00 6-12 J55. M55. K55.
L80. N80. P110.
API Spec 5CT (8)
Coupling 127-533.4 12.5-15 6-12 J55. M55. K55.
L80. N80. P110.
API Spec 5CT (8)

API 5CT P110 Casing Tubing Features

  • Any deformation such as crease, hairline, separation, crack or scab is not acceptable on both inner and outer surfaces of the product. All these defects should be completely removed, and the removed depth must not exceed 12.5% of nominal wall thickness.
  • The surface of thread of coupling and API 5CT P110 Casing Tubing should be smooth without any burr, tear or other defects that may have a negative impact on the strength and close connection.
  • Deformations which mentioned above are not allowed to appear on the outer surface of API 5CT P110 Casing Tubing coupling.
  • API 5CT P110 Casing Tubing is offered with a free length range from 8 to 13m on basis of the SY/T6194-96 norm. However, it is also available no less than 6m length and its quantity should be no more than 20%.

It's important for oil and gas operators to protect their production well casings from corrosion with cathodic protection & API 5CT P110 OilField Tubing primarily serves to transfer oil and gases.

API 5CT Grade P110 Casing Tubing Steel Color Code

Name J55 K55 N80-1 N80-Q L80-1 P110
Casing a bright green band two bright green bands a bright red band a bright red band + a green band a red band + a brown band a bright white band
Coupling entire green coupling + a white band entire green coupling entire red coupling entire red coupling + a green band entire red coupling + a brown band entire white coupling

ISO/API casing/ API 5CT P110 Casing Tubing specifications

Codea Outer Dia Nominal weight
(with thread and
coupling) b,c
Wall Thickness End processing type
mm kg/m mm H40 J55 M65 L80 N801 C90d P110 Q125d
In Lb/ft K55 C95 N80Q T95d
1 2 3 4 5 6 7 8 9 10 11 12 13
4-1-2 9.5 114.3 14.14 5.21 S S S - - - - -
4-1-2 10.5 114.3 15.63 5.69 - SB SB - - - - -
4-1-2 11.6 114.3 17.26 6.35 - SLB - LB - - LB -
4-1-2 13.5 114.3 20.09 7.37 - - LB - LB - - -
4-1-2 15.1 114.3 22.47 8.56 - - - - - - LB LB
5 11.5 127 17.11 5.59 - S S - - - - -
5 13 127 19.35 6.43 - SLB SLB - - - - -
5 15 127 22.32 7.52 - SLB - LB - LB - -
5 18 127 26.79 9.19 - - LB - LB - - LB
5 21.4 127 31.85 11.1 - - - - LB LB - LB
5 23.2 127 34.53 12.14 - - - LB - - LB -
5 24.1 127 35.86 12.7 - - - LB - - LB -
5-1-2 14 139.7 20.83 6.2 S S S - - - - -
5-1-2 15.5 139.7 23.07 6.98 - SLB SLB - - - - -
5-1-2 17 139.7 25.3 7.72 - SLB LB - LB - LB -
5-1-2 20 139.7 29.76 9.17 - - - - LB LB - -
5-1-2 23 139.7 34.23 10.54 - - LB L-B - LB LB -
6-5-8 20 168.28 29.76 7.32 S SLB SLB - - - - -
6-5-8 24 168.28 35.72 8.94 - SLB LB - - LB LB -
6-5-8 28 168.28 41.67 10.59 - - LB LB - - LB -
6-5-8 32 168.28 47.62 12.06 - - - - - LB LB LB
7 17 177.8 25.3 5.87 S - - - - - - -
7 20 177.8 29.76 6.91 S S S - - - - -
7 23 177.8 34.23 8.05 - SLB - - LB LB - -
7 26 177.8 38.69 9.19 - SLB - - LB LB LB -
7 29 177.8 43.16 10.36 - - LB - LB - - -
7 32 177.8 47.62 11.51 - - LB - LB LB - -
7 35 177.8 52.09 12.65 - - - - LB - - LB
7-5-8 24 193.68 35.72 7.62 S - - - - - - -
7-5-8 26.4 193.68 39.29 8.33 - SLB SLB - LB - LB -
7-5-8 29.7 193.68 44.2 9.52 - - LB - - LB LB -
7-5-8 33.7 193.68 50.15 10.92 - - LB - - LB - -
7-5-8 39 193.68 58.04 12.7 - - - LB - - LB -
7-5-8 42.8 193.68 63.69 14.27 - - - LB - LB - -
7-5-8 45.3 193.68 67.41 15.11 - - - LB - - LB -
7-5-8 47.1 193.68 70.09 15.88 - - - - LB - - LB
8-5-8 24 219.08 35.72 6.71 - S S - - - - -
8-5-8 28 219.08 41.67 7.72 S - S - - - - -
8-5-8 32 219.08 47.62 8.94 S SLB SLB - - - - -
8-5-8 36 219.08 53.57 10.16 - SLB SLB - LB LB - -
8-5-8 40 219.08 59.53 11.43 - - LB - - LB - -
8-5-8 44 219.08 65.48 12.7 - - - LB - LB -  
8-5-8 49 219.08 72.92 14.15 - - - LB - - LB -

Codea Outer diameter Nominal weight
(with thread
and coupling) b,c
Wall thickness End processing type
mm kg/m mm H40 J55 M65 L80 N80 C90d P110 Q125d
In Lb/ft K55 C95 1, Q T95d
1 2 3 4 5 6 7 8 9 10 11 12 13
9-5-8 32.3 244.48 48.07 7.92 S - - - - - - -
9-5-8 36 244.48 53.57 8.94 S SLB SLB - - - - -
9-5-8 40 244.48 59.53 10.03 - SLB SLB - - LB - -
9-5-8 43.5 244.48 64.73 11.05 - - LB - - LB - -
9-5-8 47 244.48 69.94 11.99 - - LB LB - - LB -
9-5-8 53.5 244.48 79.62 13.84 - - - LB - LB - -
9-5-8 58.4 244.48 86.91 15.11 - - - LB - LB - -
10-3-4 32.75 273.05 48.74 7.09 S - - - - - - -
10-3-4 40.5 273.05 60.27 8.89 S SB SB - - - - -
10-3-4 45.5 273.05 67.71 10.16 - SB SB - - - - -
10-3-4 51 273.05 75.9 11.43 - SB SB - - - SB -
10-3-4 55.5 273.05 82.59 12.57 - - - - - SB SB -
10-3-4 60.7 273.05 90.33 13.84 - - - - - SB - SB
10-3-4 65.7 273.05 97.77 15.11 - - - - - SB SB -
11-3-4 42 298.45 62.5 8.46 S - - - - - - -
11-3-4 47 298.45 69.94 9.53 - SB SB - - - - -
11-3-4 54 298.45 80.36 11.05 - SB SB - - - - -
11-3-4 60 298.45 89.29 12.42 - SB SB - - SB - -
13-3-8 48 339.72 71.43 8.38 S - - - - - - -
13-3-8 54.5 339.72 81.1 9.65 - SB SB - - - - -
13-3-8 61 339.72 90.78 10.92 - SB SB - - - - -
13-3-8 68 339.72 101.19 12.19 - SB - SB - SB - -
13-3-8 72 339.72 107.15 13.06 - - - SB - SB - SB
16 65 406.4 96.73 9.53 S - - - - - - -
16 75 406.4 111.61 11.13 - SB SB - - - - -
16 84 406.4 125.01 12.57 - SB SB - - - - -
18-5-8 87.5 473.08 130.21 11.05 S SB SB - - - - -
20 94 508 139.89 11.13 SL SLB SLB - - - - -
20 106.5 508 158.49 12.7 - SLB SLB - - - - -
20 133 508 197.93 16.13 - SLB - - - - - -
S-Short round thread, L-Long round thread, B-Buttress thread
a. Code is used for ordering reference.
b. The nominal weight of threaded and coupled casing (column 2) is shown for reference only.
c. Martensitic chromium steel (L80 9Cr and 13Cr) differs from carbon steel in density. The shown weight of martensitic chromium steel is not an exact value. The mass correction factor 0.989 can be used.
d. C90, T95 and Q125 steel grade casing should be supplied according to specification, weight and wall thickness listed in the above table or order.

API 5CT P110 Tubing Mechanical Properties

Standard Type Tensile Strength
MPa
Yield Strength
MPa
Hardness
Max.
API SPEC 5CT J55 ≥517 379 ~ 552 ----
K55 ≥517 ≥655 ---
N80 ≥689 552 ~ 758 ---
L80(13Cr) ≥655 552 ~ 655 ≤241HB
P110 ≥862 758 ~ 965 ----